P1297 · Manufacturer communications

JEEP · 2016-02-11

Flash: 3.0L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves the cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 and/or Catalyst Temperature Sensor if necessary depending on Diagnostic Trouble Codes (DTCs) that may have set.SYMPTOM/CONDITION:A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Codes may have been set: · P1296-00 - EGR Slow Response - Increasing Flow. P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection TimingControl.· P20C2-00 - Reductant Heater 3 Control Circuit Performance.·…

JEEP · 2015-11-25

Flash: 3.0L Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latestavailable software. It also involves the cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 and/or Catalyst Temperature Sensor if necessary depending on Diagnostic Trouble Codes (DTCs) that may have set. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Codes may have been set: ? P1296-00 - EGR Slow Response - Increasing Flow. ? P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Timing Control. ? P20C2-00 - Reductant Heater 3 Control Circuit Performance. ? P1297-00 - EGR…

JEEP · 2015-11-25

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming Powertrain Control Module (PCM) with latest available software. It also involves cleaning or replacement of Exhaust Gas Temperature (EGT) Sensor 1/2 and/or Catalyst Temperature Sensor if necessary depending on Diagnostic Trouble Codes (DTCs) that may have set. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one or more of the following Diagnostic Trouble Codes (DTCs) set in PCM memory: ? P1296-00 - EGR Slow Response - Increasing Flow. ? P249C-00 - Excessive Time To Enter Closed Loop Reductant Injection Timing Control. ? P20C2-00 - Reductant Heater 3 Control Circuit Performance. ? P1297-00 - EGR Slow…

JEEP · 2015-10-12

Flash: 3.0 L MIL Illumination Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves the cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 and/or Catalyst Temperature Sensor if necessary depending on Diagnostic Trouble Codes (DTCs) that may have set. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set: P20C2-00 - Reductant Heater 3 Control Circuit Performance. P204F-00 - Reductant System Performance. P20E9-00 - Reductant Pressure Too High. P249C-00 - Excessive Time To Enter Closed Loop Reductant…

RAM · 2015-10-07

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P26AB-00 - Engine Coolant Bypass Valve Stuck. ? P24AF-00 - Particulate Matter Sensor Circuit Performance. ?…

RAM · 2015-10-07

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P26AB-00 - Engine Coolant Bypass Valve Stuck. ? P24AF-00 - Particulate Matter Sensor Circuit Performance. ?…

RAM · 2015-09-26

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. It also involves replacement of the Oxygen (O2) Sensor and cleaning or replacement of the Exhaust Gas Temperature (EGT) Sensor 1/2 if necessary depending on Diagnostic Trouble Codes (DTC) that may have set. A small number of customers may experience an intermittent engine shudder or vibration which may not set a Diagnostic Trouble Code (DTC). In addition other customers may experience a Malfunction Indicator Lamp (MIL) illumination upon which the technician may find one or more of the following DTCs have been set: ? P26AB-00 - Engine Coolant Bypass Valve Stuck. ? P24AF-00 - Particulate Matter Sensor Circuit Performance. ?…

RAM · 2015-08-25

Flash: 3.0L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one of more of the following Diagnostic Trouble Codes (DTCs) set in the PCM memory. ? P2196-00 ? O2 Sensor 1/1 Stuck Rich. ? P1E0C-00 ? Empty Fuel Tank. ? P2237-00 ? O2 Sensor 1/1 Pump Cell Current Circuit Open. ? P1297-00 ? EGR Slow Response - Decreasing Flow. ? P0420-00 ? Catalyst Efficiency (Bank 1). ? P24AF-00 ? Particulate Matter Sensor Circuit Performance. ? P26AB ? Engine Coolant Bypass Valve Stuck. ? P204F-00 ? Reductant System Performance. ? P20E9-00 ? Reductant Pressure Too…

JEEP · 2014-12-19

Flash: 3.0 L MIL Illumination Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set: P0087-00 - Fuel Rail Pressure Too Low. P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. P0171-00 - System Too Lean (Bank 1). P0172-00 - System Too Rich (Bank 1). P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. P225D-00 - NOX Sensor 1/1 Performance - Signal Stuck Low. P1288-00 - NOX Sensor 1/2 Zero Offset Too High. P1289-00 - NOX Sensor 1/2 Zero Offset Too Low.…

JEEP · 2014-10-17

Flash: MIL Illumination Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find one or more of the following Diagnostic Trouble Code(s) may have been set erroneously: ? P0087-00 - Fuel Rail Pressure Too Low. ? P20EE-00 - SCR NOX Catalyst Efficiency Below Threshold Bank 1. ? P0171-00 - System Too Lean (Bank 1). ? P0172-00 - System Too Rich (Bank 1). ? P225C-00 - NOX Sensor Performance - Signal Stuck High Bank 1 Sensor 1. ? P225D-00 - NOX Sensor 1/1 Performance - Signal Stuck Low. ? P1288-00 - NOX Sensor 1/2 Zero Offset Too High. ? P1289-00 - NOX Sensor 1/2…

VOLKSWAGEN · 2014-05-09

Fault code P1297 may be set and fuel mixtures may go lean if the vehicle is driven under load or revved up and then returned to idle.

VOLKSWAGEN · 2014-05-09

Tech Tips (Models with 1.8T Engine - Pressure Loss issues): Fault code P1297 may be set and fuel mixtures may go lean if the vehicle is driven under load or revved up and then returned to idle. This document informs of what to do should these systems occur.

AUDI · 2012-03-16

AUDI: 01 MIL ON (P1297, P2187, P2279), OIL LEAKS, PRESSURE LOSS, SYSTEM TOO LEAN AT IDLE SPEED, AND INTAKE AIR SYSTEM LEAK. THERE MAY BE WHISTLE NOISE/AIR RUSHING NOISE FROM THE ENGINE. ALSO INCLUDED MODEL AUDI TTS MODEL YEARS 2010-2011. *JS

AUDI · 2007-10-19

AUDI: OIL LEAKS. ONE OR MORE OF THE FOLLOWING CONDITIONS MAY BE PRESENT-MIL ON, AND ONE OR MORE OF FOLLOWING DTCS ARE STORED IN ECM DATA MEMORY-P1297 (CONNECTION CHARGER THROTTLE VALVE, PRESSURE LOSS), P2187 (FUEL TRIM BANK 1, SYSTEM TOO LEAN AT IDLE SPEED), P2279 (INTAKE AIR SYSTEM LEAK), WHISTLE NOISE, AIR RUSHING NOISE FROM ENGINE, OIL LEAKS FROM OIL FILTER CAP. *PE

VOLKSWAGEN · 2007-01-11

DTC'S P1297 (17705) OR P1557 (17965) STORED IN DTC MEMORY. THIS MAY BE CAUSED BY INTAKE HOSES LEAKING (DURING BOOST CONDITIONS) DUE TO INCORRECT TORQUE ON CLAMPS OR IMPROPER PLACEMENT, WORN OR TORN INTAKE HOSES. *KB

VOLKSWAGEN · 2001-06-27

A CONDITION MAY EXIST WHERE DIAGNOSTIC TROUBLE CODES P1297 OR P1557 ARE STORED IN DIAGNOSTIC TROUBLE CODE MEMORY. MAY BE CAUSED BY INTAKE HOSES LEAKING DUE TO CLAMPS INCORRECTLY TORQUED OR IMPROPERLY PLACED, WORN / TORN INTAKE HOSES ETC. *TT