Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P164D00oil pressure switch for reduced oil pressure malfunction
P164D00Oil pressure switch for reduced oil pressure malfunction
Manufacturer communications
5Original wording in English
AUDI
This technical service bulletin contains information regarding the MIL being on due to DTC P164D00 (oil pressure switch for reduced oil pressure malfunction) being on The red oil pressure warning light and/or and oil warning: "shut vehicle off" may be displayed in the DIS.
AUDI
Supersedes Technical Service Bulletin Group 01 number 15-27 dated June 30, 2015. DTC P164D00 is stored in the engine control module. The red oil pressure warning light may be on. Rubber oil drain plug within the oil filter housing is out of position.
AUDI
DTC P164D00 is stored in the engine control module. The red oil pressure warning light may be on. Rubber oil drain plug within the oil filter housing is out of position.
AUDI
Supersedes Technical Service Bulletin Group 01 number 13-42 dated November 21, 2013. DTC P164D00 is stored in the engine control module. Red oil pressure warning light may be on. An oil filter that is too short is installed. The oil filter must be 155 (+/-1) mm long. If the oil filter is too short, the drain flap in the oil filt…
Check vehicle applicability
18A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.