P179E · Manufacturer communications

AUDI · 2018-06-27

This bulletin contains repair instructions for when DTC P179E00 is stored and the mechantronic unit and/or gear sensor G676 are being replaced.

AUDI · 2016-01-11

Gearbox warning light on (DTCs P179E00, P179F00, P0700, P060A). The driver information system displays the message "gearbox malfunction: you can continue driving". There are two scenarios present. Scenario 1 is that entries are logged individually or in combination, with P179E logged first (using DTC environmental data).The entries are DTC P179E (Drive position sensor electrical error), DTC P0700 with DFCC 20196 (Transmission control system malfunction), DTC P1758 with DFCC 8464 (Terminal 15 voltage supply open circuit), and DTC P060A with DFCC 8126, 8345 (Internal control module monitoring processor performance) In this scenario, if DTC P179E is not logged first, this TSB does not apply. Scenario 2 is that entries are logged individually or in combination. The order in which the DTCs are…

AUDI · 2014-09-25

Supersedes Technical Service Bulletin Group 35 number 12-08 dated December 21, 2012. The driver information system displays the message ?Gearbox malfunction: you can continue driving?. Gearbox warning light on (DTCs P179E00, P179F00, P0700, P060A).

AUDI · 2012-12-21

Gearbox warning light on (DTCs P179E00, P179F00, P0700, P060A)

AUDI · 2012-12-21

Gearbox warning light on. Entries are logged individually or in combination, with P179E logged first (using DTC environmental data). If P179E is not logged first this TSB does not apply (using DTC environmental data), Continue with standard diagnosis. Entries are logged individually or in combination in the diagnosis protocol. The times the DTCs are logged are not relevant. The DFCC is the 4-6 digit code that is typically listed before the fault code . Fault codes and DFCC codes must match exactly or this TSB should not be followed. Incorrect driving mode sensor module.