Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer communications
7Original wording in English
KIA
TECHNICAL SERVICE BULLETIN: AWD/4WD COUPLING ACTUATOR REPLACEMENT (CA2503) - This bulletin provides information related to the Technical Service Bulletin previously published under ELE374, titled ‘Service Action: AWD Coupling Actuator Logic Improvement (SA605)’. If the affected vehicles experience a loss of AWD capability (FWD c…
KIA
TECHNICAL SERVICE BULLETIN: AWD COUPLING ACTUATOR LOGIC IMPROVEMENT (SA605) - This bulletin provides information to upgrade the 4-Wheel Drive (“4WD”) system software on certain 2024-2025MY Seltos (SP2) vehicles equipped with All-Wheel Drive (“AWD”) produced from February 14, 2023 through October 08, 2024. The affected vehicles m…
KIA
TECHNICAL SERVICE BULLETIN: 4WD COUPLING ACTUATOR ASSEMBLY REPLACEMENT - This bulletin has been revised to include additional information. New/revised sections of this bulletin are indicated by a black bar in the margin area. This bulletin provides information to replace the AWD coupling actuator assembly on some 2021-2024MY Kia…
GENESIS
When servicing any of the specified vehicles below with the corresponding DTCs, follow the step-by-step procedures in this bulletin. • Transfer case actuator DTC codes P196000, P195800, or P195513
Check vehicle applicability
26A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.