Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P1C86-1DPRNDL Display Current out of Range
Manufacturer communications
4Original wording in English
JEEP
Flash: Electronic Shift Module (ESM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● U114C-00 - Lost Communication With PRNDL Display. ● P1C86-00 - PRNDL Display. Customers may also comment …
JEEP
KL Gear Shift Module For 2015-2018 KL ONLY, if vehicle DTC Code P1C86-1D (PRNDL Display Current out of Range) is verified as either stored or active please contact Pablo Flores in FCA Chassis Engineering at cell (248) 979-7062. If no response in 15 minutes, proceed with repair. For additional repair see NOTES below: NOTE 1: If D…
DODGE, JEEP
Part Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent …
DODGE, JEEP
Part Description: ATX Shifter Issue Description: Prior to removing (or disconnecting) the automatic transmission shifter knob, for any service to the shifter or for console removal, disconnect and isolate the battery negative cable. Wait two minutes for the system capacitor to discharge before further service. This will prevent …
Check vehicle applicability
9A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Dodge | DURANGO ↗ | 2015 |
| Jeep | CHEROKEE ↗ | 2018 |
| Jeep | CHEROKEE ↗ | 2017 |
| Jeep | CHEROKEE ↗ | 2016 |
| Jeep | CHEROKEE ↗ | 2015 |
| Jeep | GRAND CHEROKEE ↗ | 2023 |
| Jeep | GRAND CHEROKEE ↗ | 2015 |
| Jeep | GRAND CHEROKEE 4XE ↗ | 2023 |
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.