Skip to content

P1D83 · Manufacturer communications

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

P1D83 ← What does this code mean?

12 Results

18-109-25 ↗

JEEP · 2025-12-13

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician must find one or more of the following Diagnostic Trouble Codes (DTC)s have been set: ● P2450 - Fuel Tank Isolation Valve Stuck Open. ● P1D83 - Implausible Engine Oil Temperature Signal Received. Customers may comment on one or more of the following: ● Fuel Door will not open due to intermittent Fuel Tank Isolation Valve (FTIV) Stuck Open. ● Reduced fuel efficiency. In addition, the following software enhancement is available: ● Hood Switch changes. This bulletin involves reprogramming the PCM, HCP and AHCP, also known as the Power Inverter Module (PIM) with the latest available software

18-108-25 ↗

JEEP · 2025-12-13

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician must find one or more of the following Diagnostic Trouble Codes (DTC)s have been set: ● P2450 - Fuel Tank Isolation Valve Stuck Open. ● P1D83 - Implausible Engine Oil Temperature Signal Received. Customers may comment on one or more of the following: ● Fuel Door will not open due to intermittent Fuel Tank Isolation Valve (FTIV) Stuck Open. ● Reduced fuel efficiency. In addition, the following software enhancement is available: ● Hood Switch changes. This bulletin involves reprogramming the PCM, HCP and AHCP, also known as the Power Inverter Module (PIM) with the latest available software.

18-107-25 ↗

JEEP · 2025-12-13

Flash: Powertrain Control Module (PCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician must find one or more of the following Diagnostic Trouble Codes (DTC)s have been set: ● P2450 - Fuel Tank Isolation Valve Stuck Open. ● P1D83 - Implausible Engine Oil Temperature Signal Received. Customers may experience one or more of the following: ● Fuel Door will not open due to intermittent Fuel Tank Isolation Valve (FTIV) Stuck Open. ● Reduced fuel efficiency.** ● Excessive oil life degradation shown when viewing fuel and oil data screen. **In addition, the following software enhancement is available: ● Hood Switch changes.** This bulletin involves reprogramming the PCM with the latest available software

18-026-25 REV. A ↗

JEEP · 2025-07-19

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle mustexhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P04B5 - Fuel Fill Door Stuck Open. ● P1D83 - Implausible Engine Oil Temperature Signal Received.** ● P2450 - Fuel Tank Isolation Valve Stuck Open. ● P0032 - O2 Sensor 1/1 Heater Circuit High. ● P2097 - Downstream Fuel Trim System 1 Rich. ● P0171 - Fuel System 1/1 Lean. ● P0300 - Multiple Cylinder Misfire. ● P06E4 - Control Module Wake-Up Circuit Performance. ● B12B4 - Charge Status Indicator Module Internal. ● P061B - Internal Control Module Torque Calculation Performance. ● P0810 - Clutch Position Control Error. ● P2885 - Engine Disconnect Clutch Engagement Fault.…

1812022 ↗

JEEP · 2022-06-23

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs have been set: P1D83 - Implausible Engine Oil Temperature Signal Received. U0418 Implausible Data Received From Brake System Control Module. DTC U0418 can be set erroneously due to a low battery (below 10 volts).Customers may experience the following: An audible clunk after applying throttle from a coasting condition, predominantlyin fifth and sixth gear while driving 48 - 72 kph (30 - 45 mph).

1807722 ↗

JEEP · 2022-04-09

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs: P1D83 - Implausible Engine Oil Temperature Signal Received. P2610 - PCM Internal Engine Off Timer Performance. P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control…

1807922 ↗

JEEP · 2022-04-08

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs have been set: P1D83 - Implausible Engine Oil Temperature Signal Received. P2610 - PCM Internal Engine Off Timer Performance. Customers may experience one or more of the following: An audible clunk after applying throttle from a coasting condition, predominantlyin fifth and sixth gear while driving 48 - 72 kph (30 - 45 mph). Software was updated to better address this condition. A message on the instrument cluster stating ?Speed limiter ready? afterthe first press of the speed limiter button and the Active…

1806620 ↗

JEEP · 2020-08-25

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one of the following DTCs have been set:P1D83 - Implausible Engine Oil Temperature Signal Received. P0556 - Brake Booster Pressure Sensor Circuit Performance. U0428 - Implausible Data Received From Steering Angle Sensor Module. U1504 - Implausible Message Data Length Received From Steering Angle Sensor. C0501 - Left Front Wheel Speed Sensor Range/Performance. C0507 - Right Front Wheel Speed Sensor Range/Performance. C050D - Left Rear Wheel Speed Sensor Range/Performance. C0513 - Right Rear Wheel Speed Sensor…

18-066-20 ↗

JEEP · 2020-08-25

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one of the following DTCs have been set:P1D83 - Implausible Engine Oil Temperature Signal Received. P0556 - Brake Booster Pressure Sensor Circuit Performance. U0428 - Implausible Data Received From Steering Angle Sensor Module. U1504 - Implausible Message Data Length Received From Steering Angle Sensor. C0501 - Left Front Wheel Speed Sensor Range/Performance. C0507 - Right Front Wheel Speed Sensor Range/Performance. C050D - Left Rear Wheel Speed Sensor Range/Performance. C0513 - Right Rear Wheel Speed Sensor…

18-085-17 ↗

JEEP · 2017-09-19

Flash: Powertrain Diagnostic and System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find the following DTCs set in the PCM memory:P1D83 - Implausible Engine Oil Temperature Signal Received (Software has been updated to better address this DTC). U1504 - Implausible Message Data Length Received From Steering Angle Sensor. U1424 - Implausible Engine Torque Signal Received. P0456 - EVAP System Small Leak. P0335 - Crankshaft Position Sensor Circuit. U0402 - Implausible Data Received From TCM - (Transmission Control Module). B10EA - Blower Motor Control Circuit High. B10E9 - Blower…

18-035-16 REV.A ↗

JEEP · 2016-06-30

"FLASH: POWERTRAIN DIAGNOSTIC AND SYSTEM IMPROVEMENTS THIS BULLETIN INVOLVES REPROGRAMMING THE POWERTRAIN CONTROL MODULE (PCM) WITH THE LATEST AVAILABLE SOFTWARE. A SMALL NUMBER OF CUSTOMERS MAY EXPERIENCE A MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATION. UPON FURTHER INVESTIGATION, THE TECHNICIAN MAY FIND THE FOLLOWING DTCS SET IN THE PCM MEMORY: · **U1424 - IMPLAUSIBLE ENGINE TORQUE SIGNAL RECEIVED.** · P1D83 - IMPLAUSIBLE ENGINE OIL TEMPERATURE SIGNAL RECEIVED. · P0456 - EVAP SYSTEM SMALL LEAK. · P0335 - CRANKSHAFT POSITION SENSOR CIRCUIT. · U0402 - IMPLAUSIBLE DATA RECEIVED FROM TCM - (TRANSMISSION CONTROL MODULE). · B10EA - BLOWER MOTOR CONTROL CIRCUIT HIGH. · B10E9 - BLOWER MOTOR CONTROL CIRCUIT LOW. · P0441 - EVAP PURGE SYSTEM PERFORMANCE. · P0116 - ENGINE COOLANT TEMPERATURE SENSOR…

18-035-16 ↗

JEEP · 2016-04-02

Flash: Powertrain Diagnostic And System Improvements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may find the following Diagnostic Trouble Codes (DTCs) set in the PCM memory: · **P1D83 - Implausible Engine Oil Temperature Signal Received.** · P0456 - EVAP System Small Leak. · P0335 - Crankshaft Position Sensor Circuit. · U0402 - Implausible Data Received From TCM - (Transmission Control Module).** · B10EA - Blower Motor Control Circuit High. · B10E9 - Blower Motor Control Circuit Low. · P0441 - EVAP Purge System Performance. · P0116 - Engine Coolant Temperature Sensor Performance. · P2067 -…