Skip to content

Powertrain

P2109

Code meaning and manufacturer information

OBD-II / DTC

Reference meaning

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Manufacturer wording

Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.

View all ↗

Manufacturer communications

3

Original wording in English

View all ↗

09-98-22R ↗

SUBARU

This bulletin announces the availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0014, P0024, P0128, P2109. If any of the DTCs listed above are found to be stored in the ECM, follow the procedures outlined in the bulletin. This is an revis…

09-102-23 ↗

SUBARU

This bulletin announces the diagnostic procedures and availability of reprogramming files to rectify DTCs P2404 (Evap System Leak Detection Pump Sense Circuit Range/Performance) and P2109 (Throttle/Pedal Position Sensor “A” Minimum Stop Performance).

0101004 ↗

UNKNOWN

MIL ILLUMINATION WITH DTC P2107, P2108 OR P2109. APPLICABLE MODEL: MAZDA RX-8. *MR

Check vehicle applicability

6

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

MakeModelModel year
SubaruASCENT ↗2022
SubaruASCENT ↗2021
SubaruASCENT ↗2020
SubaruASCENT ↗2019
SubaruWRX ↗2022
UNKNOWNUNKNOWN1 ↗Year unknown

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.