Skip to content

Powertrain

P2282

Code meaning and manufacturer information

OBD-II / DTC

Reference meaning

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Manufacturer communications

15

Original wording in English

View all ↗

TSB 23-2315 ↗

FORD

Some 2023 Maverick vehicles built on or before 11-Apr-2023 and equipped with a 2.5L full hybrid electric vehicle (FHEV) powertrain may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2282. This may be due to the software in the powertrain control module (PCM). To correct this condition…

TSB 23-2193 ↗

FORD

Some 2023 Maverick vehicles built on or before 11-Apr-2023 and equipped with a 2.5L full hybrid electric vehicle (FHEV) powertrain may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2282. This may be due to the software in the powertrain control module (PCM). To correct this condition…

21B68-S1 ↗

FORD

In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor may cause the check engine light to illuminate with diagnostic codes P1A0C, P2282, or P0106 in the PCM (powertra…

21B68 ↗

FORD

Certain 2020-2021 Model Year Escape 2.5L HEV PHEV Vehicles Reprogram Powertrain Control Module (PCM) In some of the affected vehicles, it may be possible that the TMAP (Temperature Manifold Absolute Pressure) sensor may ice over while driving in cold temperatures for extended periods of time. An iced over TMAP sensor may cause t…

Check vehicle applicability

23

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

MakeModelModel year
FordBRONCO SPORT ↗2021
FordEDGE ↗2020
FordEDGE ↗2019
FordESCAPE ↗2021
FordESCAPE ↗2020
FordESCAPE HYBRID ↗2021
FordESCAPE HYBRID ↗2020
FordMAVERICK ↗2023

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.