Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
P242B-00Exhaust Gas Temperature Sensor Circuit Performance - Bank 1 Sensor 3
P242B-64Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 3 - Signal plausibility failure
Manufacturer communications
41Original wording in English
RAM
SENSOR Exhaust Temperature If this sensor is being replaced due to an early-life P242B pending fault code, clear the fault code and perform the Powertrain Verification Test. Only replace the sensor if P242B returns as an active fault code.
RAM
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0088-00 - Fuel Rail Pressure Too High - Bank 1. ● P208B-00 - Reductant Pump 1 Control Performance. ● P…
RAM
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0088-00 - Fuel Rail Pressure Too High - Bank 1. ● P208B-00 - Reductant Pump 1 Control Performance. ● P…
RAM
Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **P0088-00 - Fuel Rail Pressure Too High - Bank 1. ● P208B-00 - Reductant Pump 1 Control Performance.** ● P2540-…
Check vehicle applicability
173A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Chevrolet | SILVERADO 2500 ↗ | 2024 |
| Chevrolet | SILVERADO 3500 ↗ | 2024 |
| GMC | SIERRA 2500 ↗ | 2024 |
| GMC | SIERRA 3500 ↗ | 2024 |
| Jaguar | E-PACE ↗ | 2019 |
| Jaguar | E-PACE ↗ | 2018 |
| Jaguar | F-PACE ↗ | 2019 |
| Jaguar | F-PACE ↗ | 2018 |
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.