Skip to content

P262B · Manufacturer communications

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

P262B ← What does this code mean?

11 Results

26-01-081H DCS ↗

HYUNDAI · 2026-10-09

Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), andTucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust GasRecirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system.This condition can lead to drivability concerns related to the following DTCs: - P040400: (Exhaust Gas Recirculation Control Circuit Range) - P049D00: (EGR 'A' Control Position Exceeded Learning Limit) - P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) - P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) - P262B00: (Control Module Power Off Timer Performance) - P050C00: Cold Start Engine Coolant Temperature Performance - P1DFD00: (EVAP System…

26-01-081H TSB ↗

HYUNDAI · 2026-10-08

Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), and Tucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust Gas Recirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system. This condition can lead to drivability concerns related to the following DTCs: • P040400: (Exhaust Gas Recirculation Control Circuit Range) • P049D00: (EGR 'A' Control Position Exceeded Learning Limit) • P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) • P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) • P262B00: (Control Module Power Off Timer Performance) • P050C00: Cold Start Engine Coolant Temperature Performance • P1DFD00: (EVAP System…

26-01-081H DN ↗

HYUNDAI · 2026-10-08

Certain Santa Fe Hybrid (TM HEV), Santa Fe Plug-in Hybrid (TM PHEV), Tucson Hybrid (NX4 HEV), and Tucson Plug-in Hybrid (NX4 PHEV) vehicles may experience intake air line freezing and Exhaust Gas Recirculation (EGR) valve corrosion due to excessive condensation accumulating within the EGR system. This condition can lead to drivability concerns related to the following DTCs: • P040400: (Exhaust Gas Recirculation Control Circuit Range) • P049D00: (EGR 'A' Control Position Exceeded Learning Limit) • P047100: (Exhaust Pressure Sensor 'A' Circuit Range/Performance) • P012800: Coolant Thermostat (Coolant Temperature below Thermostat Regulation Temperature) • P262B00: (Control Module Power Off Timer Performance) • P050C00: Cold Start Engine Coolant Temperature Performance • P1DFD00: (EVAP System…

PIT5391F ↗

CADILLAC, CHEVROLET, GMC · 2023-02-13

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits.

PIP5754 ↗

CADILLAC · 2020-09-28

This Preliminary information communicates to the dealer an issue where diagnostic trouble code P262B may set in the engine control module due to a software concern. The dealer has been advised to clear the dtc and release the vehicle as the issue is under investigation.

PIT5391E ↗

CADILLAC, CHEVROLET, GMC · 2019-02-08

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits.

PIP5609 ↗

CADILLAC, CHEVROLET, GMC · 2018-11-02

This Preliminary information communicates to the dealer an issue where the vehicle's service engine soon light may illuminate due to trouble codes P0601-P0604, P0606, P062B, P062F, P0630, P16F3, or P262B . The dealer is to inspect the engine control module's electrical connections and for proper powers and grounds. Dealer instructed to replace the Engine Control Module, if no other issues found.

PIT5391D ↗

CADILLAC, CHEVROLET, GMC · 2018-03-15

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits.

PIT5391C ↗

CADILLAC, CHEVROLET, GMC · 2016-12-12

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits.

PIT5391B ↗

CADILLAC, CHEVROLET, GMC · 2016-08-17

THIS PRELIMINARY INFORMATION COMMUNICATION PROVIDES INFORMATION TO THE TECHNICIAN ON HOW TO DIAGNOSE AND REPAIR VEHICLES THAT HAVE A NO CRANK OR A START AND THEN IMMEDIATE STALL, SERVICE ENGINE SOON MALFUNCTION INDICATOR LAMP MAY NOT BE ON WHEN THE IGNITION IS IN THE RUN POSITION. TECHNICIAN MAY FIND DIAGNOSTIC TROUBLE CODES P0513 AND OR P262B MAY ALSO BE SET. TECHNICIAN WILL PULLED THE DRIVER SILL PLATE AND INSPECT THE WIRING FOR DAMAGED OR CORRODED CIRCUITS. TECHNICIAN WILL REPAIR ANY DAMAGED OR CORRODED CIRCUITS.

PIT5391 ↗

CADILLAC, CHEVROLET, GMC · 2015-03-26

This Preliminary Information communication provides information to the technician on how to diagnose and repair vehicles that have a no crank or a start and then immediate stall, Service Engine Soon Malfunction Indicator lamp may not be on when the ignition is in the run position. Technician may find Diagnostic Trouble Codes P0513 and or P262B may also be set. Technician will pulled the driver sill plate and inspect the wiring for damaged or corroded circuits. Technician will repair any damaged or corroded circuits.