Skip to content

P2A01 · Manufacturer communications

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

P2A01 ← What does this code mean?

5 Results

TSB 23-2082 ↗

FORD · 2023-03-14

Some 2020-2022 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0315, P054F, P054E, P2A00, P2A01, and/or P02ED stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and the transmission control module (TCM).

TSB 21-2380 ↗

FORD · 2021-10-29

Some 2022 F-Super Duty vehicles equipped with a 6.7L engine and built on or before 05-Oct-2021 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P054E, P054F, P02ED, P2A00 And/Or P2A01 stored in the powertrain control module (PCM). This may be due to the software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.

SA-004-19 ↗

MAZDA · 2019-02-04

Some customers may complain of a check engine light on while driving the vehicle. If DTCs P2A04:00, P2272:00 and/or other DTCs are found during diagnosis, follow the repair procedure below. P2A04:00 - HO2S (LH) circuit range/performance, P2272:00 - HO2S (LH) signal stuck lean, P2270:00 - HO2S (RH) signal stuck lean, P2A01:00 - HO2S (RH) circuit range/performance.

25-001-13 REV. A ↗

DODGE, RAM · 2013-05-10

MIL Illumination Due to P2000, P2A00 and/or P2A01 FRONT O2 sensor. Customer may experience MIL illumination. Further investigation by the technician may find one or more of the following DTC(s) present: P2000 - NOX Absorber Efficiency Below Threshold - Bank 1. P2A00 - O2 Sensor 1/1 Circuit Performance. P2A01 - O2 Sensor 1/2 Circuit Performance.

25-001-13 ↗

DODGE, RAM · 2013-01-25

MIL Illumination Due to P2000, P2A00 and/or P2A01 This bulletin involves verifying all service bulletins related to high sooting issues have been properly addressed, inspecting both Oxygen (O2) sensors and either cleaning the sensors or replacing sensors, and installing an O2 Sensor Shield on the exhaust pipe in the area of the FRONT O2 sensor. Customer may experience MIL illumination. Further investigation by the technician may find one or more of the following DTC(s) present: ? P2000 - NOX Absorber Efficiency Below Threshold - Bank 1. ? P2A00 - O2 Sensor 1/1 Circuit Performance. ? P2A01 - O2 Sensor 1/2 Circuit Performance.