Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
U0212-00Lost Communication With Steering Column Control Module
Manufacturer communications
7Original wording in English
JEEP
Not applicable to vehicles built for US market. Multiple Systems Repair Bundle Campaign Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● U11E3-00 - TCM Lost Communication With ESM On DPT CAN. ● B15A1-00 - Med…
CHRYSLER
SWITCH Multifunction Before replacing the steering column control module (SCCM) due to DTC U0212 active, please follow these steps: 1.- Refer to service library procedure and follow diagnosis steps at BCM. 2.- If failure still present, make sure all the switches' and airbag's harness are properly connected and there is no corros…
ISUZU
Dealers, upfitters or bodybuilders may notice various warning lights on the dash illuminating and certain DTCs without an apparent cause during the initial installation and connection of telematics, GPS, and/or other aftermarket devices to the FMS system on certain 2022MY vehicles equipped with RPO I4H, DTCs that may occur are P…
CADILLAC, CHEVROLET, GMC
This informational bulletin provides information for dealers/technicians on the false setting of DTC U0212.
Check vehicle applicability
66A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A4 ↗ | 2010 |
| Audi | A4 ↗ | 2009 |
| Audi | A4 ALLROAD ↗ | 2014 |
| Audi | A4 ALLROAD ↗ | 2013 |
| Audi | A4 AVANT ↗ | 2012 |
| Audi | A4 AVANT ↗ | 2011 |
| Audi | A5 ↗ | 2014 |
| Audi | A5 ↗ | 2013 |
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.