Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
U0416-68brake actuator malfunction
U0416-92temporary stop of integrated driver support system [rejected control request by VSA system]
U0416FE"Implausible data were received from control unit Traction system" in A108/1 (Distronic)
Manufacturer communications
26Original wording in English
FORD
Some 2025-2026 Mustang GTD vehicles built on or before 28-Sep-2026 may exhibit one or more of the following hydraulic system warning messages displayed in the instrument panel cluster (IPC): "Suspension Fault Speed Limited to 80 MPH", "Driver Selectable Suspension Fault", "Front Lift Not Available", "Drive Mode Not Available" an…
MERCEDES-BENZ
Complaint Either during PDI or after updating vehicle software, there may be: • "A+S" - Active and Stored DTC • "S" - Stored DTC Some known erroneous DTC's are: • C1016E0 with error ID: SIG_ESP_71 • B15BF00 with error ID: SIG_SEMA_C_22 • U0420E2 with error ID: SYS_EPS_22 • U041629 with error ID: SIG_ESP_12 • U013187 • U044229 Ca…
MERCEDES-BENZ
Complaint Either during PDI or after updating vehicle software, there may be: • "A+S" - Active and Stored DTC • "S" - Stored DTC Some known erroneous DTC's are: • C1016E0 with error ID: SIG_ESP_71 • B15BF00 with error ID: SIG_SEMA_C_22 • U0420E2 with error ID: SYS_EPS_22 • U041629 with error ID: SIG_ESP_12 • U013187 • U044229 Ca…
AUDI
This TSB provides information about engine control unit drive system faults P060C00 and U041600.
Check vehicle applicability
110A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
| Make | Model | Model year |
|---|---|---|
| Audi | A4 ↗ | 2025 |
| Audi | A4 ↗ | 2024 |
| Audi | A4 ↗ | 2023 |
| Audi | A4 ↗ | 2022 |
| Audi | A4 ALLROAD ↗ | 2024 |
| Audi | A4 ALLROAD ↗ | 2023 |
| Audi | A4 ALLROAD ↗ | 2022 |
| Audi | A5 ↗ | 2024 |
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.