Skip to content

Network communication

U2011

Code meaning and manufacturer information

OBD-II / DTC

Reference meaning

What does this code mean?

The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.

A code identifies a detected condition, not a part that must automatically be replaced.

Narrow by vehicle

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

Before replacing a part

Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.

Scan worksheet →

Manufacturer communications

2

Original wording in English

View all ↗

06-001-26 ↗

MAZDA

DESCRIPTION Some customers may complain that the electric power steering warning light illuminates after engine start and DTC U2011:1C is stored. Zinc-plated whisker may form inside the EPS motor and trigger the DTC. However, since it is cleared when power is supplied during DTC detection, normal operation can be restored by tur…

SSM 47792 ↗

FORD

Some 2019 Transit Connect vehicles built on or after 28-May-2018 may experience a lack of power steering assist or a power steering fault message in the message center. It is important to avoid cycling the ignition switch. Charge the battery and remove the vehicle from transportation mode. If diagnostic trouble codes (DTCs) U300…

Check vehicle applicability

16

A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.

View all ↗

MakeModelModel year
FordTRANSIT CONNECT ↗2019
MazdaCX-30 ↗2026
MazdaCX-30 ↗2025
MazdaCX-30 ↗2024
MazdaCX-30 ↗2023
MazdaCX-30 ↗2022
MazdaCX-30 ↗2021
MazdaCX-30 ↗2020

Code meaning and manufacturer information

Original wording in English · Historical directory labels; manufacturer applicability has not been established for every entry.

Module Transmitted Invalid Data (Non SCP)

Can I keep driving?

A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.