Reference meaning
What does this code mean?
The wording below belongs to the named make and communication. Match the complete code, reporting module, model year and engine before applying it.
A code identifies a detected condition, not a part that must automatically be replaced.
Narrow by vehicle
A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Before replacing a part
Record codes and freeze-frame data. Check battery condition, related codes and visible wiring or hose damage. Follow the vehicle's diagnostic procedure and test results before replacing parts.
Scan worksheet →Manufacturer wording
Source wording can vary by vehicle and suffix. It is shown as written, not as a universal diagnosis.
U3000:04Telematics communication unit internal malfunction
U3000:98Forward sensing camera (FSC) stops functioning due to temporary high temperature
U3000-49ECU INTERNAL CIRCUIT MALFUNCTION
Manufacturer communications
217Original wording in English
CADILLAC, CHEVROLET, GMC
This preliminary information communicates an issue with a service column lock message and DTC U3000. Engineering is working on the issue and in the meantime dealerships are to reset/clear the DTC and perform four sleep cycles to verify the DTC does not return.
FORD, LINCOLN
Some 2025 Aviator/Explorer/Police Interceptor Utility vehicles may exhibit a "Steering Assist Fault Service Required" message and diagnostic trouble codes (DTC) C1110:56 and/or U3000:96 stored in the power steering control module (PSCM) after programming. This may be due to a calibration mismatch in the PSCM which has been resol…
FORD
This bulletin updates 26-2206. Reason for update: update the Service Procedure to revise Steps 19-21, adding Step 22, and adding Figure 15-16 to clarify connector C316 location. Some of the vehicles listed in the Model statement above may exhibit diagnostic trouble codes (DTCs) C1001:31, U3000:89, and/or U3000:49 stored in the i…
BUICK, CADILLAC, CHEVROLET, GMC
This PI states that if SDGM DTC U3000 Sym 49 is set and no other SDGM DTCs are present, clear DTCs and reset the SDGM. Advises of how to contact PQC to authorize SDGM replacement.
Check vehicle applicability
477A listed vehicle is a research lead. Confirm the engine, production range and software in the manufacturer's information.
Can I keep driving?
A code alone cannot establish whether driving is safe. A flashing malfunction light, severe shaking, overheating, oil-pressure warning or loss of braking or steering needs prompt attention. Stop in a safe place and seek assistance when control or engine safety is affected. Follow the vehicle handbook.