Ansehen

JEEP

9003768

2017-08-16 · NHTSA 10224690

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Herstellerzusammenfassung

Englischer Originaltext

Fuel Tank 1) Before replacing this part due to fault code P0441, check for restriction due to plastic over-flash in the Purge Hose Port of the Intake Manifold for the ERB (3.6L engine only). If there is flash in the Purge Hose Port of the Intake Manifold, then remove the flash with a 5/32? drill bit and clean the Intake Manifold of any flash debris. 2) Before replacing this part due to ?Hard to Fuel Fill? condition, check the Fuel Filler Tube for restriction in the Vent Tube. If there is blockage, then replace the Fuel Filler Tube. Contact Sylvia H. Lopez at (248) 520-9734 before replacing the Tank. If you do not receive a call back within 15 minutes, then continue the repair.

NHTSA-Herstellerinformationen ↗

Nur Einreichungen mit gleicher Marke, Nummer, Datum und vollständiger Zusammenfassung werden gruppiert. Originalnummern und ältere Dokumente bleiben erhalten; bestätigte explizite Ersetzungen werden markiert. Zuordnungen vor 1994 sind getrennt. Fehlendes Modelljahr bedeutet nicht alle Modelljahre.