Ansehen

MERCEDES-BENZ

LI18.10-P-078867

2025-02-28 · NHTSA 11014684

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Herstellerzusammenfassung

Englischer Originaltext

Complaint Red oil pressure warning in instrument cluster One of the below fault codes is stored in powertrain control unit N127: P052497 The oil pressure is too low. The system function is restricted. P052400 The oil pressure is too low Cause Various Remedy If low oil level warning present diagnose cause of this first. -Check engine oil level and correct if necessary. Refer to vehicle specific instructions AP18.00-P-1848U -Check for external engine oil leaks -Measure engine oil pressure via graphical representation in MRG actual values. In one measurement capture the pressure at idle, 1000, 2000, and 3000 rpm. Hold each range for approx. 5 seconds. -Save results as CSV file -Create TIPS case and submit to the powertrain team, including • Oil pressure test results CSV file • Initial quick test • Any additional test results or observations • Any previous diagnosis or repairs performed

NHTSA-Herstellerinformationen ↗

Nur Einreichungen mit gleicher Marke, Nummer, Datum und vollständiger Zusammenfassung werden gruppiert. Originalnummern und ältere Dokumente bleiben erhalten; bestätigte explizite Ersetzungen werden markiert. Zuordnungen vor 1994 sind getrennt. Fehlendes Modelljahr bedeutet nicht alle Modelljahre.