B1082 · Herstellerinformationen

MAZDA · 2024-12-12

Some customers may experience that the air conditioning system stops working. Upon inspection, DTC B1082:19 [DASH_ESU] (Air mix actuator (RH) circuit malfunction) is stored in memory. DTC B1082:19 is stored as a past malfunction and continues in one drive cycle, then returns normal at the next drive cycle. Due to the electrical noise caused when the air mix actuator is driven too quickly, a false malfunction may be detected. To eliminate this concern, the control software of the dash-electrical supply unit has been modified.

MAZDA · 2024-02-05

Some customers may experience that the air conditioning system stops working. Upon inspection, DTC B1082:19 [DASH_ESU] (Air mix actuator (RH) circuit malfunction) is stored in memory. DTC B1082:19 is stored as a past malfunction and continues in one drive cycle, then returns normal at the next drive cycle. Due to the electrical noise caused when the air mix actuator is driven too quickly, a false malfunction may be detected. To eliminate this concern, the control software of the dash-electrical supply unit has been modified.

FORD · 2023-01-23

Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue with the blend door and its controls. To avoid repeat repairs, replace the air distribution housing/heater assembly (service base part# 18478). Refer to Workshop Manual (WSM), Section 412-00. Do not replace the evaporator core for this condition. The WSM has been updated to reflect this change. For claiming use causal part 18478 and use applicable labor operations in Section 11 of the Service…

FORD · 2022-03-23

Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue with the blend door and its controls. To avoid repeat repairs, replace the air distribution housing/heater assembly (service base part# 18478). Refer to Workshop Manual (WSM), Section 412-00. Do not replace the evaporator core for this condition. The WSM has been updated to reflect this change. Use causal part 18478 and labor operation 19700D33 of the Service Labor Time Standards (SLTS) Manual.

FORD · 2021-09-03

Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue with the blend door and its controls. To avoid repeat repairs, it is recommended to replace the air distribution housing/heater asy (service base part# 18478). Refer to Workshop Manual, Section 412-00.

FORD · 2021-03-30

Some 2021 F-150 vehicles built on 06-Sep-2020 and through 24-Jan-2021 may experience the climate temperature control is inoperative or does not operate correctly. The vehicle may exhibit diagnostic trouble codes (DTC) B1081 and/or B1082 in the heating, ventilation and air conditioning (HVAC) module. This may be due to a software issue with the HVAC module. To correct the condition, update the HVAC module using the latest level of the appropriate Ford diagnostic scan tool. If the condition persists, refer to Workshop Manual, Section 412-00 and continue with normal diagnostics. For claiming, use causal part number 19980 and applicable labor times from the Service Labor Times Standard (SLTS) Manual.

FORD · 2020-10-15

Some 2019-2020 Ranger vehicles built on or before 30-Jul-2020 may experience poor and/or no temperature change when the temperature is adjusted in the climate control system. There may also be a clicking/snapping noise from behind the instrument panel. Diagnostic trouble code (DTC) B1082 and/or B1081 may also be retrieved from the front controls interface module (FCIM). This may be due to an issue with the blend door and its controls. To avoid repeat repairs, it is recommended to replace the climate control housing assembly (service base part# 18478). Refer to Workshop Manual, Section 412-00.