Ansehen

Karosserie

B10AA

Bedeutung und Herstellerinformationen

OBD-II / DTC

Referenzbedeutung

Was bedeutet dieser Code?

Der Wortlaut gehört zur genannten Marke und Mitteilung. Vollständigen Code, Steuergerät, Modelljahr und Motor abgleichen.

Ein Code beschreibt einen erkannten Zustand und bestimmt nicht automatisch ein auszutauschendes Teil.

Nach Fahrzeug eingrenzen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Vor dem Teiletausch

Codes und Freeze-Frame sichern. Batterie, weitere Codes und sichtbare Schäden an Kabeln oder Schläuchen prüfen. Vor Teiletausch Diagnoseablauf und Messergebnisse des Fahrzeugs beachten.

Diagnose-Arbeitsblatt →

Herstellerinformationen

4

Englischer Originaltext

Alle ansehen ↗

0806417 ↗

ALFA ROMEO

Audio System Warning Light Illuminated This bulletin involves checking and installing a protective cover on the amplifier. The customer may describe that the when the audio system warning light is illuminated the radio will turn on but with no audio sound.Upon further investigation the technician may find that the following Diag…

ALFA ROMEO

Flash: MIL Illumination And Transmission Over Temperature Message This bulletin involves updating the Body Control Module (BCM) software. The customer may notice a cluster message ?Transmission Over Temperature? that appears for a short time and the Malfunction Indicator Lamp (MIL) may turn on. The customer may also notice that …

08-021-15 ↗

ALFA ROMEO

Transmission Over Temperature Message This bulletin involves updating the Body Control Module (BCM) software. The customer may notice a cluster message ?Transmission Over Temperature? that appears for a short time and the Malfunction Indicator Lamp (MIL) may turn on. The customer may also notice that the Dynamic Car Control Syst…

08-051-14 ↗

FIAT

Odometer Flashing And B10AA-4A- Check Configuration Failed - Incorrect Component Installed This bulletin involves a Body Control Module (BCM) Proxi Alignment, for proper operation. The customer may notice that the Odometer is flashing. On further inspection an active DTC may be found, B10AA-4A- Check Configuration Failed - Incor…

Fahrzeugzuordnung prüfen

3

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Alle ansehen ↗

MarkeModellModelljahr
Alfa Romeo4C ↗2015
Alfa Romeo4C SPIDER ↗2017
Fiat500L ↗2014

Kann ich weiterfahren?

Ein Code allein beurteilt keine Fahrsicherheit. Blinkende Motorkontrollleuchte, starkes Ruckeln, Überhitzung, Öldruckwarnung oder beeinträchtigte Bremse oder Lenkung erfordern Aufmerksamkeit. Bei Gefahr für Kontrolle oder Motor sicher anhalten und Hilfe holen. Fahrzeughandbuch beachten.