AUDI · 2023-09-20
This bulletin provides information on reinstalling the navigation database when DTC B126CF0 and/or B126CF1 is stored in the 005F.
B126C · Herstellerinformationen
Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.
B126C ← Was bedeutet dieser Code?7 Ergebnisse
AUDI · 2023-08-18
This bulletin contains instructions to reinstall the navigation database in the presence of DTC B126CF1 stored in the 005F.
AUDI · 2023-01-17
This bulletin provides instructions for when a customer states that after an over-the-air navigation map update the navigation system is permanently initializing or the navigation map is incomplete or corrupt and DTC B126CF0 and/or B126CF1 may be stored in the electronics control module.
AUDI · 2021-05-17
This bulletin contains instructions for when the MMI shows the message "Read error occurred when accessing the navigation data" after initialization and reboots constantly with DTC B126CF0 and/or B126CF1.
AUDI · 2020-06-18
This bulletin contains instructions for when the MMI shows the message 'Read error occurred when accessing the navigation data' after initialization and reboots constantly with DTC B126CF0 and/or B126CF1.
AUDI · 2020-02-20
This bulletin contains instructions for when the MMI shows the message 'Read error occurred when accessing the navigation data' after initialization and reboots constantly with DTC B126CF0 and/or B126CF1.
AUDI · 2015-06-24
The navigation function is not available, and the message ?The navigation data are not activated? appears in the MMI. DTC B126CF2 (Navigation system navigation database not enabled) is set in the information electronics control module, J794 (address word 5F). Navigation is a feature of the MMI that requires a license activation using SVM. The process is handled by the gateway and the MMI inside the vehicle. In some instances, the feature can be affected if the gateway is placed into ?Component Protection Showroom Mode? or if the gateway and MMI lose communication with each other. As a result, either the license activation must be performed again online using SVM or the component protection removal must be performed.