B15DA · Herstellerinformationen

FORD · 2025-08-29

This article supersedes TSB 23-2407 to update the Service Procedure and the labor operations from M-time to AP-time and add a limit. Some of the vehicles listed in the Model Statement above, may exhibit a "Pro Power Onboard Unavailable" message in the vehicle center display screen with diagnostic trouble Code (DTC) B15DA:09 in the Body Control Module (BCM). This may be due to the software level of the BCM and powertrain control module (PCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS).

FORD · 2023-12-08

Some 2021-2022 F-150 vehicles equipped with a direct current/alternating current converter module A (DCACA) inverter (minor feature code HUKAK) may exhibit a Pro Power Onboard Unavailable message in the vehilce center display screen with DTC B15DA:09 in the BCM. This may be due to the software level of the BCM and powertrain control module (PCM). To confirm a vehicle is built with a certain minor feature code, review the build information by double-clicking the vehicle identification number (VIN) in the upper left corner in the Professional Technician System (PTS). To correct this condition, perform the Service Procedure below to reprogram the BCM and PCM to the latest software level via the Ford Diagnosis and Repair System (FDRS).

FORD · 2022-11-10

Some 2021 F-150 vehicles equipped with a 2.0kW Pro Power Onboard inverter system and built on or before 15-Jun-2021 may experience a Pro Power Onboard Unavailable message displayed in the center display screen and alternating current (AC) power outlet sockets inoperative with diagnostic trouble code (DTC) B1438:03 stored in the body control module (BCM) or DTC B15DA:09 stored in the BCM without observable symptoms. This may be due to various software parameters in the direct current/alternating current converter module A (DCACA). To correct the condition, follow the Service Procedure to update the software in the DCACA. NOTE: A 2.0kW Pro Power Onboard inverter system is identified by the DCAC inverter assembly being located in the cabin under the rear seat on the left side of the vehicle.…