B2000 · Herstellerinformationen

PORSCHE · 2022-06-30

Instructions on advanced technical information for E-Hybrid OBC Fault B200000 DTC E11C11.

AUDI · 2022-06-10

This bulletin contains a software update for DTC B200043.

AUDI · 2022-05-11

This bulletin contains a software update for DTC B200043.

AUDI · 2022-02-23

This bulletin contains ODIS instructions for DTC B200096 or B200000 with an SOS malfunction warning displayed in the instrument cluster.

PORSCHE · 2022-02-16

Instructions on advanced technical information for the E-Hybrid OBC Fault - B200000 DTC E11C11 “Function restriction”

AUDI · 2022-01-31

This bulletin contains ODIS instructions for DTC B200096 or B200000 with an SOS malfunction warning displayed in the instrument cluster.

AUDI · 2021-12-13

This bulletin contains repair instructions for when the Audi virtual cockpit is blank with DTC B200049.

AUDI · 2021-11-17

This bulletin contains a software update for DTC B200043.

AUDI · 2021-11-17

This bulletin contains a software update for DTC B200043.

PORSCHE · 2021-11-02

Information on the warning message - "PowerAssist Failure - Greater Force Needed" for fault memory B200046 - Function Restriction.

AUDI · 2021-10-05

This bulletin contains instructions for DTC B200049 when the Audi virtual cockpit is blank.

BENTLEY · 2021-09-10

Customer statement: Night vision warning lamp is evident with the Drivers Information Panel (DIP). Workshop findings: DTC - B2000F2: Faulty control module (Symptom code 4102) evident within address 0084 Night vision control module. Technical background: IMPORTANT: In the event that the issue is evident and the vehicle is post the VINs shown below, a DISS query must be raised ensuring the following is attached to the query. -Detailed description in which the issue occurred, for example -Driving on a quiet road with no traffic, conditions were wet, the road had no street lighting. -Clear photographs showing the condition of the night vision camera and night vision camera lens. -Current and up to date ODIS log. However, should the vehicle be prior to the VIN cut off, the operative MUST carry…

AUDI · 2021-07-08

This bulletin contains ODIS instructions for DTC B200096 or B200000 with an SOS malfunction warning displayed in the instrument cluster.

AUDI · 2021-07-07

This informational bulletin requests that the technician call TAC and submit diagnostic documentation with a photo for DTC B200049 with a blank instrument cluster and a red master malfunction indicator.

AUDI · 2021-06-25

This bulletin contains instructions for dealing with DTC B200000.

AUDI · 2021-04-20

This buletin contains a software update when there is a red steering warning lamp and DTC B200000 is stored.

BENTLEY · 2021-01-07

DTC B2000F2: Faulty control module (Symptom code 4102) and/or Night vision warning light evident within the (DIP). Customer statement Night vision warning lamp (Figure 1) is evident with the Drivers Information Panel (DIP). Measure 1) Check and Confirm there is no damage to the Night vision camera lens - Check and confirm the camera is secure NOTE: Should no issues be found carry out the remaining onward instructions: - Follow the applicable DTC related test plan within ODIS to completion 2) Proceed with the replacement of the Night vision Control unit if required (as per test plan instruction) - Refer to Rep.Gr 44 - Control unit for night vision (J853) - To remove and fit NOTE: The operative MUST ensure the Night vision camera is calibrated as per Rep.Gr 44

AUDI · 2020-10-27

This bulletin contains ODIS instructions for DTC B200096 or B200000 with an SOS malfunction warning displayed in the instrument cluster.

AUDI · 2020-10-19

This bulletin contains instructions for dealing with DTC B200000.

AUDI · 2020-10-08

This bulletin contains instructions for dealing with DTC B200000.

AUDI · 2020-08-31

This bulletin contains a software update for when the intersection/lane change assist system is inoperable one of four messages and DTC B200047 stored in one of the corner radar modules.

AUDI · 2020-05-20

This bulletin contains ODIS instructions for DTC B200096 or B200000 with an SOS malfunction warning displayed in the instrument cluster.

AUDI · 2020-04-20

This bulletin contains a software update for DTC B200087.

PORSCHE · 2020-02-14

Instructions for fixing the fault code B200000 on the new Taycan. The fault is for the E Call warning.

AUDI · 2020-02-06

This bulletin contains a repair script and instructions for DTC B200087.

AUDI · 2020-02-03

This bulletin states that DTC B200004 is a ghost DTC and no components should be replaced for it.

AUDI · 2020-01-15

This bulletin contains a software update and test plan for DTCs C12EBF1, C12EB92, B200042 or B200047.

AUDI · 2019-12-09

This bulletin contains a repair script and instructions for DTC B200087.

AUDI · 2019-11-07

This bulletin contains a software update and test plan for DTCs C12EBF1, C12EB92, B200042 or B200047.

AUDI · 2019-10-22

This bulletin contains a software update and test plan for DTCs C12EBF1, C12EB92, B200042 or B200047.