Ansehen

C1415 · Herstellerinformationen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

C1415 ← Was bedeutet dieser Code?

3 Ergebnisse

SSM 52299 ↗

FORD · 2024-02-27

Some 2023-2024 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) U02A2, P206B, P203B, P208A, P20FA, P20FD, and/or P20FC stored in the powertrain control module (PCM). Before performing normal diagnostics, inspect connectors C1273C (32 pin) and C406 (14 pin) for proper connection. Also disconnect and inspect C1415 (32 pin), C406 (14 pin), C4863 (7 pin) and C4864 (5 pin) on the 14405 vehicle harness for signs of terminal push out, water intrusion and/or corrosion. Refer to the Wiring Diagram for connector locations. Repair as necessary. Refer to Wiring Diagram Cell 005 for repair procedures.

SSM 51891 ↗

FORD · 2023-08-28

Some 2023 F-Super Duty vehicles equipped with a 6.7L engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) U02A2, P206B, P203B, P208A, P20FA, P20FD, and/or P20FC stored in the powertrain control module (PCM). Before performing normal diagnostics, inspect connectors C1273C (32 pin) and C406 (14 pin) for proper connection. Also disconnect and inspect C1415 (32 pin), C406 (14 pin), C4863 (7 pin) and C4864 (5 pin) for signs of water intrusion and/or corrosion. Refer to the Wiring Diagram for connector locations. Repair as necessary. Refer to Wiring Diagram Cell 005 for repair procedures.

0814422 ↗

RAM · 2022-07-30

Flash: Drivetrain Control Module (DTCM) Diagnostic and System Improvements This bulletin involves reprogramming the DTCM with the latest available software. The technician may find one or more of the following DTCs: C1415-92 - Transfer Case Motor Current-Performance or Incorrect Operation. U1440 - Implausible Transfer Case Ratio High Received. U0403-00 - Implausible Data Received From T-case. C1403-92 - Transfer Case Range Position Sensor-Performance Or Incorrect Operation(2019-2020 Vehicles Only). If only DTC C1403 is present, follow normal diagnostic procedures before updating the DTCM. In addition the customer may describe one or more of the following:Traction Control System light is illuminated. A driveline bump can be heard/felt occasionally when the driver is steady on the throttle…