Ansehen

C1472 · Herstellerinformationen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

C1472 ← Was bedeutet dieser Code?

8 Ergebnisse

S2403000006 ↗

RAM · 2024-10-21

Service 4WD System Message Displayed. Diagnostic Trouble Code (DTC) C1472-13 Transfer Case Clutch Control Circuit Open, Set.

9100191 ↗

JEEP · 2023-07-19

SHAFT, Front Axle Output For concerns related to a C1463-94 OR C1472-92 DTC, reference the latest version of TSB 08-103-22 prior to replacing the Front Axle Disconnect (FAD) / Output Shaft. If DTCM software update does not resolve concern proceed with repair.

0810322REVA ↗

JEEP · 2022-06-18

Flash: Drivetrain Control Module (DTCM) Updates This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a ?Service 4WD message? illumination. Upon further investigation the technician may find one or more of the following DTCs have been set: C1472-92 - Transfer Case Clutch Control-Performance Or Incorrect Operation(Sales Code DHY only). If any of these DTCs C1472-92, C149D-54 or C2206-56 are present(Sales Code DHY only), proceed toStep 4of the Repair Procedure. C1463-94 - Front Axle Disconnect Control-Unexpected Operation. The customer may also experience the following:Service 4WD light illuminated. Front axle does not engage when selected.

08-103-22 ↗

JEEP · 2022-05-11

Flash: Drivetrain Control Module (DTCM) Updates This bulletin involves reprogramming the DTCM with the latest available software. Customers may experience a ?Service 4WD message? illumination. Upon further investigation the technician may find one or more of the the following DTCs have been set: C1472-92 - Transfer Case Clutch Control-Performance Or Incorrect Operation(Sales Code DHY only).If any of these DTCs C1472-92, C149D-54 or C2206-56 are present(Sales Code DHY only), proceed toStep 11of the Repair Procedure. C1463-94 - Front Axle Disconnect Control-Unexpected Operation. The customer may also experience the following:Service 4WD light illuminated. Front axle does not engage when selected.

S2121000014 ↗

JEEP · 2022-03-18

Service 4WD Message Illuminated. Diagnostic Trouble Code (DTC) C1472-92 ? Transfer Case Clutch Control ? Performance or Incorrect Operation.

S2121000014 RevC ↗

JEEP · 2022-03-18

Service 4WD Message Illuminated. Diagnostic Trouble Code (DTC) C1472-92 ? Transfer Case Clutch Control ? Performance or Incorrect Operation.

S2121000014 ↗

JEEP · 2021-08-18

Malfunction Indicator Lamp (MIL) Illumination. Diagnostic Trouble Code (DTC) C1472-92 ? Transfer Case Clutch Control ? Performance or Incorrect Operation, Set After Performing A Routine Module Software Update.

9004408 ↗

JEEP · 2021-08-18

MODULE, Transfer Case Control (DTCM) If there are any ECU's being updated for Software updates this will cause an interuption in CAN communication which in combined with a shortened key cycle (CAN communication is still alive) can cause the C1472-92 DTCM Fault. If Vehicle sets C1472-92 verify the diagnostics by the following: (1.) Take Vehicle Scan to verify DTC is Active/Stored. Send to Tech Advisor to record DTC snapshot information. If Vehicle sets C1472-92 verify the repair by the following: (1.) Verify there are no Ground loose connections / concerns (G910A) by ensuring the ground stud securement is correct. (2.) Complete sleep cycle. Allow DTCM to fully shutdown. PRDNL lights will no longer illuminate. (3.) After complete shutdown, turn ignition on and shift out of Park. (4.) Shift…