Ansehen

C1F05 · Herstellerinformationen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

C1F05 ← Was bedeutet dieser Code?

4 Ergebnisse

NTB23-077A ↗

NISSAN · 2025-01-13

ADAS DTC SERVICE INFORMATION SERVICE INFORMATION If one or more of the following ADAS (Advanced Driver Assistance System) DTCs are stored, but continue to be current after the vehicle is turned OFF (IGN OFF) and then back to Ready Mode (IGN ON),  C1F90-97 – ADAS control unit 2 circuit  C1F05-49 – Front camera unit  C1F05-97 – Front camera unit  C1F05-04 – Front camera unit  U19BC-87 – CAN comm err (Side radar rear LH)  U19BD-87 – CAN comm err (Side radar rear RH)  U19C2-87 – Ethernet circuit ERROR(AVM)  U19C7-87 – Ethernet comm err (HD map module)  U19C6-87 – Ethernet comm err (Front camera)  C21F6-49 – Camera  C258E-86 – Steering Angle Sensor  C2500-49 – Camera unit malf  C2506-49 – Front camera unit  U2159-87 – CAN communication error (steering control unit)  C2540-04 –…

NTB23-077 ↗

NISSAN · 2023-11-06

ADAS DTC SERVICE INFORMATION SERVICE INFORMATION If one or more of the following ADAS (Advanced Driver Assistance System) DTCs are stored, but continue to be current after the vehicle is turned OFF (IGN OFF) and then back to Ready Mode (IGN ON), ï‚· C1F90-97 – ADAS control unit 2 circuit ï‚· C1F05-49 – Front camera unit ï‚· C1F05-97 – Front camera unit ï‚· C1F05-04 – Front camera unit ï‚· U19BC-87 – CAN comm err (Side radar rear LH) ï‚· U19BD-87 – CAN comm err (Side radar rear RH) ï‚· U19C2-87 – Ethernet circuit ERROR(AVM) ï‚· U19C7-87 – Ethernet comm err (HD map module) ï‚· U19C6-87 – Ethernet comm err (Front camera) ï‚· C21F6-49 – Camera ï‚· C258E-86 – Steering Angle Sensor ï‚· C2500-49 – Camera unit malf ï‚· C2506-49 – Front camera unit ï‚· U2159-87 – CAN communication error (steering…

NTB22-088 ↗

NISSAN · 2022-10-10

LANE CAMERA OVER TEMPERATURE DTC STORED SERVICE INFORMATION The Lane Camera can become overheated if the interior room temperature or temperature around the camera becomes excessively high, and does not initially indicate a sustained fault. If overheated, the Lane Camera should be cooled to outside ambient temperature, any stored DTCs erased, and then allowed to resume operation. Refer to the ESM for any DTCs that will not erase. This condition may cause the following system functions to be suspended: ï‚· Vehicle-to-vehicle distance control mode (ICC - Intelligent Cruise Control) ï‚· Conventional (fixed speed) cruise control mode ï‚· Steering wheel assistance function ï‚· AEB (Automatic Emergency Braking) ï‚· LDW (Lane Departure Warning) ï‚· I-LI (Intelligent Lane Intervention) ï‚· Blind…

ITB22-035 ↗

INFINITI · 2022-10-10

LANE CAMERA OVER TEMPERATURE DTC STORED SERVICE INFORMATION The Lane Camera can become overheated if the interior room temperature or temperature around the camera becomes excessively high, and does not initially indicate a sustained fault. If overheated, the Lane Camera should be cooled to outside ambient temperature, any stored DTCs erased, and then allowed to resume operation. Refer to the ESM for any DTCs that will not erase. This condition may cause the following system functions to be suspended: ï‚· Vehicle-to-vehicle distance control mode (ICC - Intelligent Cruise Control) ï‚· Conventional (fixed speed) cruise control mode ï‚· Steering wheel assistance function ï‚· AEB (Automatic Emergency Braking) ï‚· LDW (Lane Departure Warning) ï‚· I-LI (Intelligent Lane Intervention) ï‚· Blind…