Ansehen

Antriebsstrang

P0504

Bedeutung und Herstellerinformationen

OBD-II / DTC

Referenzbedeutung

Was bedeutet dieser Code?

Der Wortlaut gehört zur genannten Marke und Mitteilung. Vollständigen Code, Steuergerät, Modelljahr und Motor abgleichen.

Ein Code beschreibt einen erkannten Zustand und bestimmt nicht automatisch ein auszutauschendes Teil.

Nach Fahrzeug eingrenzen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Vor dem Teiletausch

Codes und Freeze-Frame sichern. Batterie, weitere Codes und sichtbare Schäden an Kabeln oder Schläuchen prüfen. Vor Teiletausch Diagnoseablauf und Messergebnisse des Fahrzeugs beachten.

Diagnose-Arbeitsblatt →

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

Alle ansehen ↗

Herstellerinformationen

16

Englischer Originaltext

Alle ansehen ↗

01-001-24a ↗

MAZDA

Some vehicles may exhibit check engine light turns on with DTC P0504:00 [PCM] (Brake switch circuit problem) stored in memory. This may be caused by the PCM incorrectly reading the brake switch input. To eliminate this concern, the control software of the PCM has been modified.

01-001-24 ↗

MAZDA

Some vehicles may exhibit check engine light turns on with DTC P0504:00 [PCM] (Brake switch circuit problem) stored in memory. This may be caused by the PCM incorrectly reading the brake switch input. To eliminate this concern, the control software of the PCM has been modified.

SA-062-23 ↗

MAZDA

Some customers may experience a "Push Button Start Malfunction. Have the Vehicle Inspected" warning message and the following DTC(s) may be stored. C0040:24 - Brake switch (No.1 signal) circuit malfunction P0504:00 - Brake switch system: Circuit malfunction

SSM 51432 ↗

FORD

Some 2020-2022 F-Super Duty vehicles may exhibit a condition where the vehicle will not shift out of park (P). Diagnostic trouble codes (DTC) C0040 and/or P0504 may also be present. Reference TSB 22-2044 to make sure that no water or corrosion is present in the battery junction box (BJB). If Pinpoint Test A: Brake Shift Interloc…

Fahrzeugzuordnung prüfen

46

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Alle ansehen ↗

MarkeModellModelljahr
FordECOSPORT ↗2021
FordESCAPE ↗2021
FordESCAPE ↗2020
FordF-250 SD ↗2022
FordF-250 SD ↗2021
FordF-250 SD ↗2020
FordF-350 SD ↗2022
FordF-350 SD ↗2021

Kann ich weiterfahren?

Ein Code allein beurteilt keine Fahrsicherheit. Blinkende Motorkontrollleuchte, starkes Ruckeln, Überhitzung, Öldruckwarnung oder beeinträchtigte Bremse oder Lenkung erfordern Aufmerksamkeit. Bei Gefahr für Kontrolle oder Motor sicher anhalten und Hilfe holen. Fahrzeughandbuch beachten.