P06DE · Herstellerinformationen

VOLVO · 2026-09-12

This is a Technical Journal: DTC ECM-P06DE00 set, no symptoms. Do not replace any parts or perform additional fault tracing. This is a misdetection and a false positive (a.k.a. "ghost code"). The oil pump is actually working as intended

VOLVO · 2025-12-11

This is a Technical Journal: DTC ECM-P06DE00 set, no symptoms. Do not replace any parts or perform additional fault tracing. This is a misdetection and a false positive (a.k.a. "ghost code"). The oil pump is actually working as intended

VOLVO · 2025-03-20

This is a Technical Journal: DTC ECM-P06DE00 set, no symptoms. Do not replace any parts or perform additional fault tracing. This is a misdetection and a false positive (a.k.a. "ghost code"). The oil pump is actually working as intended

BUICK, CHEVROLET · 2024-12-05

This Preliminary information communicates to the dealers information related to potential failed engine camshaft cover causing excessive engine oil consumption, blue smoke from the exhaust system at low mileage. Can also possibly cause a misfire or idle surge and may or may not set history or current codes P0300 P050D P0521 P06DE P1101. It advises inspections for potential engine camshaft cover replacement.

BUICK, CHEVROLET · 2024-08-16

This Preliminary information communicates to the dealers information related to potential failed engine camshaft cover causing excessive engine oil consumption and blue smoke from the exhaust system at low mileage. Can also possibly cause a misfire and may or may not set history or current codes P0300 P050D P0521 P06DE. It advises inspections for potential engine camshaft cover replacement.

BUICK, CHEVROLET · 2024-08-13

This Preliminary information communicates to dealers engine wiring harness inspections and engine oil pump diagnostic testing related to MIL on with P0521, P06DD or P06DE.

JEEP · 2022-04-09

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs: P1D83 - Implausible Engine Oil Temperature Signal Received. P2610 - PCM Internal Engine Off Timer Performance. P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control…

BUICK, CHEVROLET, GMC · 2022-03-11

This service bulletin provides a repair procedure to correct a customer concern of a MIL Illuminated with DTC P0172, P06DE and/or P0521 Set.

BUICK, CADILLAC, CHEVROLET, GMC · 2022-03-11

This service bulletin provides repair procedures, depending on model year, to correct a customer concern of a Malfunction Indicator Lamp (MIL) Illuminated with DTC P0172, P06DE and/or P0521 Set.

BUICK, CADILLAC, CHEVROLET, GMC · 2021-04-09

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P06DE set in the Engine Control Module. P0651 may also be set in the ECM with the P06DE. Technician must follow published Service Information diagnostics for P06DE. If diagnostics lead to removing the oil pan or engine oil pressure is below specification when hot, to inspect the oil piston nozzles for damage. Technician should replace the broken oil nozzle(s) as long as the engine does not have any damage which warrants engine replacement.

JEEP · 2021-02-16

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):P2610 - PCM Internal Engine Off Timer Performance. P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver…

JEEP · 2021-02-16

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):P2610 - PCM Internal Engine Off Timer Performance. P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver…

JEEP · 2020-10-01

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs:P2610 - PCM Internal Engine Off Timer Performance. P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver Door Ajar Switch 2 Circuit…

JEEP · 2020-10-01

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs:P2610 - PCM Internal Engine Off Timer Performance. P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver Door Ajar Switch 2 Circuit…

JEEP · 2020-09-11

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs):P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver Door Ajar Switch 2 Circuit Low. B25C8 - Driver Door…

BUICK, CHEVROLET · 2020-06-04

Service Update - On certain vehicles, the engine oil pump may be stuck due to foreign material, and diagnostic trouble codes (DTC) P0521, P06DE, P06DD could be set. Dealers are to perform the engine oil pump screening test and if necessary, replace the oil pump.

JEEP · 2020-05-16

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs:P2610 - PCM Internal Engine Off Timer Performance. P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver Door Ajar Switch 2 Circuit…

BUICK · 2020-04-14

Service Update Bulletin. On certain vehicles, the engine oil pump may be stuck due to foreign material, and diagnostic trouble codes (DTC) P0521, P06DE, P06DD could be set. Dealers are to perform the engine oil pump screening test.

JEEP · 2019-11-01

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs:P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver Door Ajar Switch 2 Circuit Low. B25C8 - Driver Door Ajar Switch 2 Circuit…

JEEP · 2019-11-01

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs:P06EF - Engine Restart Performance. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. C1252 - Vacuum Pump Control Circuit - Performance Or Incorrect Operation. P06DA - Engine Oil Pressure Control Circuit. P06DD - Engine Oil Pressure Control Circuit Stuck Off. P06DE - Engine Oil Pressure Control Circuit Stuck On. B25C7 - Driver Door Ajar Switch 2 Circuit Low. B25C8 - Driver Door Ajar Switch 2 Circuit…

BUICK, CADILLAC, CHEVROLET, GMC · 2019-09-23

This Preliminary information communicates to the technician information on what may be setting DTC P06DE. This is in addition to what is already in the service manual.

BUICK, CADILLAC, CHEVROLET, GMC · 2019-09-16

This Preliminary information communicates to the technician information on what may be setting DTC P06DE. This is in addition to what is already in the service manual.

BUICK, CHEVROLET, GMC · 2018-05-15

This Preliminary information communicates the possibility of the timing chain tesnioner gasket being improperly installed or mis-positioned after major engine repairs causing a low engine oil pressure and dtc p06DE.

BUICK, CHEVROLET, GMC · 2017-09-13

This Preliminary information communicates the possibility of the timing chain tensioner gasket being improperly installed or mis-positioned after major engine repairs causing a low engine oil pressure and dtc p06DE.

DODGE · 2015-12-12

Flash: 3.6L Powertrain Diagnostic And System Enhancements This bulletin involves flash reprogramming the Powertrain Control Module (PCM) with new software. NOTE: There will be two software packages to choose from. Both software updates will fix all symptoms/conditions listed. One will contain a enhanced accelerator pedal operation and one will not. Refer to the ?Symptoms/Conditions? for a detailed description of the changes. Be sure to consult with the Customer on what software version they prefer, Enhanced Pedal or Standard Pedal. Once the software choice is programmed it is a permanent change. NOTE: There is another software choice available, in addition to addressing all the symptom/conditions listed. This new version of software called Enhanced Pedal has an update to the accelerator…

BUICK, CADILLAC, CHEVROLET · 2015-06-01

This preliminary informational bulletin provides technicians with repair information to correct a customer concern of engine mechanical noise from front of engine and/or Oil Pressure Low message on; DTC P06DD or P06DE may be set.

BUICK, CADILLAC, CHEVROLET · 2014-12-05

This Preliminary Information communication provides information to the technician about vehicles that have a Service Engine Soon Malfunction Indicator Lamp. Technician may find Diagnostic Trouble Code P06DE set in the Engine Control Module. Technician must follow published Service Information diagnostics for P06DE. If diagnostics lead to removing the oil pan or engine oil pressure is below specification when hot, to inspect the oil piston nozzles for damage. Technician should replace the broken oil nozzle(s) as long as the engine does not have any damage which warrants engine replacement.