Ansehen

P0880 · Herstellerinformationen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

P0880 ← Was bedeutet dieser Code?

4 Ergebnisse

TSB_ELE256_R1 ↗

KIA · 2022-06-03

TECHNICAL SERVICE BULLETIN SERVICE ACTION: TRANSMISSION WIRE HARNESS UPGRADE AND RELATED DTC P07XX, P0880 (SA499) - This bulletin provides information to upgrade the transmission wire harness on some 2023MY Sportage (NQ5a) vehicles produced from January 12, 2022 through June 1, 2022, in which the wire harness may rub against the shift cable bracket bolt and in some cases, cause the wiring to become chaffed and create an intermittent ground against the bolt. This condition can potentially cause the MIL to come ON with DTC(s) P07XX and/or P0880 and may cause the vehicle to default into 5th gear. The vehicle can continue to be operated in default mode (5th gear), but it will accelerate slowly. Follow the procedure outlined in this publication to upgrade the transmission harness.

TSB_ELE256 ↗

KIA · 2022-05-20

TECHNICAL SERVICE BULLETIN: SERVICE ACTION: TRANSMISSION WIRE HARNESS UPGRADE AND RELATED DTC P07XX, P0880 (SA499) - This bulletin provides information to upgrade the transmission wire harness on some 2023MY Sportage (NQ5a) vehicles produced from January 12, 2022 through May 12, 2022, in which the wire harness may rub against the shift cable bracket bolt and in some cases, cause the wiring to become chaffed and create an intermittent ground against the bolt. This condition can potentially cause the MIL to come ON with DTC(s) P07XX and/or P0880 and may cause the vehicle to go default into 5th gear. The vehicle can continue to be operated in default mode (5th gear), but it will accelerate slowly.

20-AT-018H ↗

HYUNDAI · 2020-05-21

If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 3. ï‚· Check Engine light on ï‚· DTC P0880/P088000 - TCM Power signal error open/short ï‚· Transmission stuck in 4th gear fail-safe ï‚· Harsh shift into Drive and Reverse

20-AT-017H ↗

HYUNDAI · 2020-05-21

If you are servicing an applicable vehicle with the following symptoms and DTC, follow the Service Procedure on Page 4. ï‚· Check Engine light on ï‚· DTC P0880/P088000 - TCM Power signal error open/short ï‚· Transmission stuck in 4th gear fail-safe ï‚· Harsh shift into Reverse and Drive