Ansehen

Antriebsstrang

P0ABB

Bedeutung und Herstellerinformationen

OBD-II / DTC

Referenzbedeutung

Was bedeutet dieser Code?

Der Wortlaut gehört zur genannten Marke und Mitteilung. Vollständigen Code, Steuergerät, Modelljahr und Motor abgleichen.

Ein Code beschreibt einen erkannten Zustand und bestimmt nicht automatisch ein auszutauschendes Teil.

Nach Fahrzeug eingrenzen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Vor dem Teiletausch

Codes und Freeze-Frame sichern. Batterie, weitere Codes und sichtbare Schäden an Kabeln oder Schläuchen prüfen. Vor Teiletausch Diagnoseablauf und Messergebnisse des Fahrzeugs beachten.

Diagnose-Arbeitsblatt →

Herstellerinformationen

4

Englischer Originaltext

Alle ansehen ↗

18NA225 ↗

CHEVROLET

This technical bulletin provides information to diagnose a MIL Illuminated with Loss of Propulsion and one or more of the following DTCs Set: P0ABC, P0AFA, P1AE6, P0D26, P0C78, P0ABB.

18NA225 ↗

CHEVROLET

This Bulletin provides information to diagnose a MIL Illuminated with Loss of Propulsion and one or more of the following DTCs P0ABC, P0AFA, P1AE6, P0D26, P0C78, P0ABB Set.

17NA328 ↗

CHEVROLET

This bulletin provides a procedure to perform a HPCM2 update or install a Battery Energy Control Module if DTCs P1AE6, P1FFF or P0ABB set.

PIP5322 ↗

CHEVROLET

This Preliminary Information communication provides information to the technician about there is a Diagnostic Trouble Code P0ABB or P0A0C set while attempting to disable the high voltage system. Diagnostic Trouble Code P0A0C or P0ABB could be induced if the Manual Service Disconnect was not fully seated and latched. P0ABB could …

Fahrzeugzuordnung prüfen

5

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Alle ansehen ↗

MarkeModellModelljahr
ChevroletBOLT EV ↗2019
ChevroletBOLT EV ↗2018
ChevroletBOLT EV ↗2017
ChevroletSPARK EV ↗2015
ChevroletSPARK EV ↗2014

Kann ich weiterfahren?

Ein Code allein beurteilt keine Fahrsicherheit. Blinkende Motorkontrollleuchte, starkes Ruckeln, Überhitzung, Öldruckwarnung oder beeinträchtigte Bremse oder Lenkung erfordern Aufmerksamkeit. Bei Gefahr für Kontrolle oder Motor sicher anhalten und Hilfe holen. Fahrzeughandbuch beachten.