Ansehen

Antriebsstrang

P2300

Bedeutung und Herstellerinformationen

OBD-II / DTC

Referenzbedeutung

Was bedeutet dieser Code?

Der Wortlaut gehört zur genannten Marke und Mitteilung. Vollständigen Code, Steuergerät, Modelljahr und Motor abgleichen.

Ein Code beschreibt einen erkannten Zustand und bestimmt nicht automatisch ein auszutauschendes Teil.

Nach Fahrzeug eingrenzen

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Vor dem Teiletausch

Codes und Freeze-Frame sichern. Batterie, weitere Codes und sichtbare Schäden an Kabeln oder Schläuchen prüfen. Vor Teiletausch Diagnoseablauf und Messergebnisse des Fahrzeugs beachten.

Diagnose-Arbeitsblatt →

Wortlaut des Herstellers

Wortlaut kann nach Fahrzeug und Suffix variieren; keine universelle Diagnose.

Alle ansehen ↗

Herstellerinformationen

7

Englischer Originaltext

Alle ansehen ↗

1802223 ↗

ALFA ROMEO

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P1CEA-00 - Boost Side EVAP Purge System Performance.** ? P2300-00 - Ignition C…

1802323 ↗

RAM

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P1CEA-00 - Boost Side EVAP Purge System Performance.** ? P2300-00 - Ignition C…

1802223 ↗

ALFA ROMEO

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P2300-00 - Ignition Coil 9A9 Primary Control Circuit Low. ? P2303-00 - Ignitio…

TT-14-011 ↗

HINO

The Burner Control Module (BCU) judges DTC?s P2441 (CAV Stuck), P2300 (Ignition Coil Failure) and P060C (BCU Temp Sensor Failure) on burner start up, if one of the fault conditions is met the BCU can go into a temporary stop mode. If this mode is entered, all regen requests will be ignored and cancelled by the BCU and there will…

Fahrzeugzuordnung prüfen

13

Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.

Alle ansehen ↗

Kann ich weiterfahren?

Ein Code allein beurteilt keine Fahrsicherheit. Blinkende Motorkontrollleuchte, starkes Ruckeln, Überhitzung, Öldruckwarnung oder beeinträchtigte Bremse oder Lenkung erfordern Aufmerksamkeit. Bei Gefahr für Kontrolle oder Motor sicher anhalten und Hilfe holen. Fahrzeughandbuch beachten.