P2BF3 · Herstellerinformationen

FORD · 2022-10-19

Some 2019-2021 F-150 vehicles built on or before 04-Mar-2021 and equipped with a 5.0L engine may experience an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0171, P0172, P0174, P0175, P0364, P060B, P062B, P1104, P164C, P2601, P2BEC, P2BED, P2BEE, P2BEF, P2BF0, P2BF1, P2BF2 and/or P2BF3 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).

FORD · 2021-02-23

Some 2019-2020 F-150 vehicles equipped with a 2.7L EcoBoost engine built on or before 04-Jul-2020 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2196, P2198, P2BF0, P2BF2, P2BF1, P2BF3, P2BEC, P2CEE, P2BED, P130D and/or P2BEF stored in the powertrain control module (PCM). There may also be an intermittent brief deceleration when cruise control is enabled. This may be due to software in the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM.

FORD · 2020-09-18

Some 2018 F-150 vehicles equipped with a 2.7L EcoBoost engine may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P2196, P2198, P2BF0, P2BF2, P2BF1, P2BF3, P2BEC, P2BED, P2BEE, P2BEF, P130D, P0300, P0316, P0301-P0306, P0171, P0174, P219A, P219B, P0172 and/or P0175 stored in the powertrain control module (PCM). This may be due to software in the powertrain control module (PCM) or direct injection fuel injectors leaking down. To correct the condition, follow the Service Procedure to reprogram the PCM and/or replace the direct injection fuel injectors.

FORD · 2020-08-10

Some 2019-2020 F-150 vehicles equipped with a 2.7L EcoBoost engine built on or before 04-Jul-2020 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P2196, P2198, P2BF0, P2BF2, P2BF1, P2BF3, P2BEC, P2CEE, P2BED, P130D and/or P2BEF stored in the powertrain control module (PCM). This may be due to software in the PCM. To correct the condtion, follow the Service Procedure to reprogram the PCM.