AUDI · 2022-11-02
This bulletin contains instructions for DTC(s) B2F0100, U012700, U112200, and/or U112300.
Eine Fahrzeugzuordnung ist ein Recherchehinweis. Motor, Produktionszeitraum und Software anhand der Herstellerangaben prüfen.
U1123 ← Was bedeutet dieser Code?44 Ergebnisse
AUDI · 2022-11-02
This bulletin contains instructions for DTC(s) B2F0100, U012700, U112200, and/or U112300.
AUDI · 2022-09-28
This bulletin provides information on how to properly address DTC U112300.
AUDI · 2022-09-16
This bulletin provides information on how to properly address DTC U112300.
BENTLEY · 2022-06-29
DTC B17B801 and/or B17B804 - evident within address 0019 and/or DTC U112300 evident in 00A5. Customer statement: Lane Assist and/or Traffic Assist are not functional Workshop findings: DTC - B17B801 - Steering Wheel Touch Recognition Control Module evident within address 0019 And/or DTC B17B804 - Steering Wheel Touch Recognition Control Module electrical error - evident within address 0019 And/or DTC U112300 with symptom Code 1123220 within address 00A5 Technical background: Revision history TPI 2063855/4 - Additional request to replace the control module (as Figure 1) in conjunction with the steering wheel
BENTLEY · 2022-06-09
HV battery will not charge - DTCs stored in address 19 (C11C5F2) and address C6 (P0D6D00) for the High Voltage System. Customer statement / workshop findings HV battery not charging and the following DTCs are stored: Gateway (19) - C11C5F2 High Voltage System wiring circuit 2 open and - U112300 Databus error value received Thermal management (C5) - P0D6D00 A/C compressor motor voltage low Technical background Internal harness failure of the High Voltage cable between the HV battery and the On-board charger
AUDI · 2022-05-20
This bulletin contains instructions for DTC(s) B2F0100, U012700, U112200, and/or U112300.
BENTLEY · 2022-04-14
DTC B17B801 and/or B17B804 - evident within address 0019 and/or DTC U112300 evident in 00A5. Customer statement / workshop findings: Lane Assist and/or Traffic Assist are not functional Workshop findings: DTC - B17B801 - Steering Wheel Touch Recognition Control Module evident within address 0019 And/or DTC B17B804 - Steering Wheel Touch Recognition Control Module electrical error - evident within address 0019 And/or DTC U112300 with symptom Code 1123220 within address 00A5. Measure: 1) Referring to Rep.Gr 48 - Remove the steering wheel Please note the replacement steering wheel is supplied without the multifunction switches (E440 and E441) fitted, the switches will require transferring from the original steering wheel to the replacement steering wheel as per Rep.Gr 96 HINT: Depending on…
AUDI · 2021-10-11
This bulletin contains instructions for DTC(s) B2F0100, U012700, U112200, and/or U112300.
BENTLEY · 2021-09-15
Customer statement: Lane Assist and/or Traffic Assist are not functional. Workshop findings: DTC-B17B801- Steering Wheel Touch Recognition Control Module evident within address 0019 And/or DTCB17B804 -Steering Wheel Touch Recognition Control Module electrical error- evident within address 0019 And/or DTC U112300 with symptom Code 1123220 within address 00A5. Technical background PLEASE NOTE: Should the affected vehicle be post the following listed VINs -Bentayga - SJAA514V3MC036546 -New Continental GT/C and New Flying Spur - SCBB15ZG1MC088177 The operative MUST raise a DISS query and await feedback before conducting any further work. For all vehicles up to and including the afore mentioned VINs the operative should conduct the instructions within the Measure section.
AUDI · 2021-07-26
This bulletin contains instructions for when DTC U112300 is stored.
AUDI · 2021-03-19
This bulletin contains instructions for when DTC U112300 is stored.
AUDI · 2021-01-19
This bulletin contains instructions for "Audi Active Lane Assist/Traffic Jam Assist: malfunction!", DTC U112300 is stored in one of two control modules
BENTLEY · 2019-09-05
EPB Warning light in DIP - Front door/s power latch system intermittent - DTC U112300 within Address 03 and Address 46. The front door/s power latching system sporadically does not work. The door remains in the first latch of the door lock and is not closed by the power latching system. The micro switch signal of the door lock is not recognised or too briefly. A counter-pressure of the door is required to clearly recognise the signal. Check whether there are other TPIs for the complaint, for example the software of the door control units are up to date
AUDI · 2016-01-12
Warning messages for the exterior lighting system are displayed in the driver information cluster. The messages are sporadically displayed immediately after engine start. The headlights function correctly at all times. DTCs U112300 (Data bus, received error value), B121713 (Lamp for left dipped beam, interruption), U112300 (Data bus, received error value (symptom 13706046)), and U112300 (Data bus, received error value (symptom 13706047)) are stored. It is a software-related issue in in the headlamp range control module, J431 (address word 55). Updated software was introduced into series production.