Ver

JEEP

21-030-24

2024-05-10 · NHTSA 11001226

La relación con un vehículo es una pista. Confirma motor, producción y software en la documentación del fabricante.

Resumen del fabricante

Texto original en inglés

"Flash: Transmission Control Module (TCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs):** ● P0810-00 - Clutch Position Control Error. ● P16F0-00 - SPI Comm Hardware Fault. Customers may also comment on one or more of the following: ● K0 Adaptation routine runs when vehicle stationary and EV Mode. ● Vehicle loses propulsion capability. ● Service transmission warning indicator is on. NOTE: Require key cycle to recover. ● Shifts rough occasionally when coming down to a stop. ● Shifts rough occasionally when accelerating. ● Shifts rough when transitioning from EV to Hybrid operation on low SoC. ● Shifts rough when engines starts. ● On part throttle accelerations with little to no battery available the transition from battery power to engine on is harsh and abrupt. ● The engine oil life on dashboard drops down too fast when the engine oil dilution reaches high level without the ability to recover. **This bulletin involves reprogramming the TCM with the latest available software.** NOTE: **Please be sure that the 04B recall is completed prior to performing this TSB. This TCM software update is covered by the 04B recall if still incomplete.**"

Comunicaciones de NHTSA ↗

Solo agrupamos registros con fabricante, número, fecha y resumen completo idénticos. Conservamos los identificadores y documentos antiguos; marcamos sustituciones explícitas confirmadas. Las relaciones anteriores a 1994 se separan de los resultados predeterminados. Año no indicado no significa todos los años.