FORD

TSB 25-2144

2025-04-11 · NHTSA 11017055

La relación con un vehículo es una pista. Confirma motor, producción y software en la documentación del fabricante.

Resumen del fabricante

Texto original en inglés

Some of the vehicles listed in the Model statement above may exhibit one or more of the following conditions that lead to needing to perform the calibration (alignment) procedure on exhaust tailpipe actuators: * An illuminated malfunction indicator lamp (MIL) and an Exhaust mode not available message in the instrument panel cluster (IPC) with diagnostic trouble codes (DTCs) P26FE, P2BFB, P26C5:78, and/or P2BF8:78 stored in the powertrain control module (PCM) * A condition/symptom that requires the installation of an exhaust tailpipe actuator when undergoing normal diagnosis and repair * Exhaust tailpipe actuators failing alignment procedure after installation with parameter identification (PID) "EFCV_A_MON_STAT" and/or PID "EFCV_B_MON_STAT" reading "3" * No audible difference in exhaust tone when transitioning between exhaust modes These exhaust tailpipe actuators require alignment after installation. These vehicles may require an update to the PCM prior to attempting exhaust tailpipe actuator alignment.

Solo agrupamos registros con fabricante, número, fecha y resumen completo idénticos. Conservamos los identificadores y documentos antiguos; marcamos sustituciones explícitas confirmadas. Las relaciones anteriores a 1994 se separan de los resultados predeterminados. Año no indicado no significa todos los años.