P0014 · Comunicaciones del fabricante

AUDI · 2026-09-18

This Pending Service Solution (PSS) requests that technicians create a record in the PSS database when DTC P001400 camshaft position is stored.

SUBARU · 2026-08-31

This bulletin announces the availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0014, P0024, P0128, P2109. If any of the DTCs listed above are found to be stored in the ECM, follow the procedures outlined in the bulletin. This is an revised version of the original bulletin.

MERCEDES-BENZ · 2026-03-09

Complaint Engine vibrations perceived at low rpm. Fault codes for the camshaft position of the intake camshaft (P001100, P001104, P001200) or exhaust camshaft (P001400, P001404, P001500) may be stored. Cause Continuously fluctuating oil pressure in the central valve may lead to damage to the filter screen on the central valve. This can result in damage to the filter screen or the filter screen breaking loose. The resulting loss of oil pressure prevents proper adjustment of the camshaft adjuster. If the filter screen breaks loose, parts of it may settle in the camshaft adjuster or in the camshaft. If there are parts in the camshaft, they can pass through the oil supply bore to the last camshaft bearing (i.e., the first camshaft bearing behind the adjuster) which could cause damage there.…

MERCEDES-BENZ · 2026-02-13

Complaint Engine vibrations perceived at low rpm. Fault codes for the camshaft position of the intake camshaft (P001100, P001104, P001200) or exhaust camshaft (P001400, P001404, P001500) may be stored. Cause Continuously fluctuating oil pressure in the central valve may lead to damage to the filter screen on the central valve. This can result in damage to the filter screen or the filter screen breaking loose. The resulting loss of oil pressure prevents proper adjustment of the camshaft adjuster. If the filter screen breaks loose, parts of it may settle in the camshaft adjuster or in the camshaft. If there are parts in the camshaft, they can pass through the oil supply bore to the last camshaft bearing (i.e., the first camshaft bearing behind the adjuster) and cause damage there. Remedy 1.…

FORD, LINCOLN · 2025-11-12

Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. Pinpoint test HK in the Powertrain Control and Emissions Diagnosis (PC/ED) or in Section 303-14 of the Workshop Manual (WSM) has been updated to address this concern.

VOLVO · 2025-10-10

This is a Technical Journal: CEL with DTC ECM P001100, P001200, P001400, P001500. For MY 23-26 vehicles with engine code L1, an improved software is released in version 3.5.14 (and newer). Perform a Total Upgrade according to TJ 31543 before performing additional VIDA symptom-based fault tracing. •Software for remaining models will be released later in calendar year 2025

BUICK, CHEVROLET · 2025-08-22

This Preliminary information communicates the possibility of an engine surge or misfire with one or more of the following dtc's P0300/P0011/P0014/P0016/P0017 due to potential debris in the cam actuators

VOLVO · 2025-07-24

This is a Technical Journal: CEL with DTC ECM P001100, P001200, P001400, P001500. For MY 23-26 vehicles with engine code L1, an improved software is released in version 3.5.14 (and newer). Perform a Total Upgrade according to TJ 31543 before performing additional VIDA symptom-based fault tracing. •Software for remaining models will be released later in calendar year 2025

VOLVO · 2025-06-19

This is a Technical Journal: CEL with DTC ECM P001100, P001200, P001400, P001500. For MY 23-26 vehicles with engine code L1, an improved software is released in version 3.5.14 (and newer). Perform a Total Upgrade according to TJ 31543 before performing additional VIDA symptom-based fault tracing. •Software for remaining models will be released later in calendar year 2025

VOLVO · 2025-05-17

This is a Technical Journal: CEL with DTC ECM P001100, P001200, P001400, P001500. For MY 23-26 vehicles with engine code L1, an improved software is released in version 3.5.14 (and newer). Perform a Total Upgrade according to TJ 31543 before performing additional VIDA symptom-based fault tracing. •Software for remaining models will be released later in calendar year 2025

VOLVO · 2025-05-01

This is a Technical Journal: CEL with DTC ECM P001100, P001200, P001400, P001500. For MY 23-26 vehicles with engine code L1, an improved software is released in version 3.5.14 (and newer). Perform a Total Upgrade according to TJ 31543 before performing additional VIDA symptom-based fault tracing. •Software for remaining models will be released later in calendar year 2025

CADILLAC · 2025-03-14

This Preliminary information communicates the possibility of DTC p0011 p0014 P05CE p05CC being set as current or in history due to engine oil metal/debris contamination.

CADILLAC · 2025-02-26

This Preliminary information communicates the possibility of DTC p0014 P05CE being set as current or in history due to engine oil metal/debris contamination.

TOYOTA · 2024-04-15

Some 2023 model year Crown vehicles may exhibit a MIL ON condition with one or both of the following Diagnostic Trouble Codes (DTCs) present: •P001400 – (B Camshaft Position - Timing Over-Advanced or System Performance Bank 1) •P001500 – (B Camshaft Position - Timing Over-Retarded Bank 1) The Engine Control Module (ECM) (SAE term: Powertrain Control Module/PCM) logic has been modified to reduce the possibility of this condition.

CHEVROLET, GMC · 2023-04-14

This technical bulletin provides a procedure to locate and repair a possible short in the wiring harness located at the camshaft cover or the cylinder head to correct customer concerns of Lack of Power, Reduced Power Displayed on DIC, Rough Idle, Stabilitrak Light On, MIL Illuminated - DTC P0014, P0365, P0366 and P06A3 Set.

KIA · 2022-05-25

PITSTOP: DTC P0011/ P0014/ P0016/ P0017 DUE TO INCORRECT CAMSHAFT RELUCTOR WHEEL CONFIGURATION - This Pitstop provides information on some 2010-2013MY Soul (AM), 2014-2019MY Soul (PS), and 2020~MY Soul (SK3) vehicles equipped with the engines listed below, which may set DTC P0011, P0014, P0016, or P0017 after an engine replacement. If these DTCs were not present prior to engine replacement, the camshaft reluctor wheel (also called pulse wheel) may not be in the correct position when engine is at Top Dead Center and may be sending an erroneous signal to the PCM, causing the DTC. Follow the procedure outlined in this publication, with engine set to Top Dead Center (TDC), to inspect and identify whether the reluctor wheel is correctly clocked on the camshaft, and if not, how to correctly…

CADILLAC, CHEVROLET, GMC · 2022-05-18

This Preliminary information communicates to the dealers information related to a Malfunction Indicator Lamp (MIL) Illuminated with Any Combination of DTCs P0011 P0014 P0016 P0017 Setting. Advises to perform Strategy Based Diagnosis and to replace the affected Camshaft Position Actuator Magnet as necessary.

FORD, LINCOLN · 2021-08-27

Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK12 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

FORD · 2021-07-19

Some 2020 Transit vehicles equipped with a 3.5L Duratec engine and all 2021 Transit vehicles built on or before 01-Jul-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021 and P0022. This may be due to the software in the powertrain control module (PCM). To correct the condition, perform a variable camshaft timing (VCT) cycling and reprogram the PCM.

FORD, LINCOLN · 2021-05-24

Some 2015-2021 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTC) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

MITSUBISHI · 2020-11-20

This Technical Service Bulletin instructs dealers to reprogram the Engine Control Module (ECU) with countermeasure software to correct the issue for any affected vehicles that come in for service (with customer approval) and any in dealer inventory related to the starter no engaging or DTC Code P0014.

BUICK, CHEVROLET · 2020-08-19

Service Update Bulletin. Certain vehicles may have a condition where the camshaft actuator oil control valve (OCV) center bolt could stick or bind. If this were to happen, it could cause a MIL light to illuminate on the dash (Service Engine Soon), setting diagnostic trouble codes (DTC?s) P0011 or P0014, the engine could run rough and have reduced power. Dealers will inspect for these DTC?s that could have been set by this condition, and repair vehicles that fail the inspection.

BUICK, CHEVROLET · 2020-07-28

This technical bulletin provides a procedure to correct conditions of Engine Idle Unstable, Malfunction Indicator Lamp (MIL) Illuminated - DTC P0011, P0014, P0016, P0017, P05CC and/or P05CE Set.

BUICK, CHEVROLET · 2020-07-24

Service Update. Certain vehicles may have a condition where the camshaft actuator oil control valve (OCV) center bolt could stick or bind. If this were to happen, it could cause a MIL light to illuminate on the dash (Service Engine Soon), setting diagnostic trouble codes (DTC?s) P0011 or P0014, the engine could run rough and have reduced power. Dealers will inspect for these DTC?s that could have been set by this condition, and repair vehicles that fail the inspection.

BUICK, CHEVROLET · 2020-06-12

SUB - Certain 2020-2021 Buick Encore GX and 2021 Chevrolet Trailblazer vehicles may have a condition where the camshaft actuator oil control valve (OCV) center bolt could stick or bind. If this were to happen, it could cause a MIL light to illuminate on the dash (Service Engine Soon), setting diagnostic trouble codes (DTC?s) P0011 or P0014, the engine could run rough and have reduced power. Dealers will inspect for these DTC?s that could have been set by this condition, and pass or fail based on results.

FORD, LINCOLN · 2019-12-20

Some 2015-2020 Ford and Lincoln vehicles may exhibit an illuminated MIL with diagnostic trouble codes (DTCs) P0011, P0012, P0014, P0015, P0016, P0017, P0018, P0019, P0021, P0022, P0024 and/or P0025. This may be due to small debris causing the VCT solenoid to stick. Before attempting any component diagnosis or replacement of the VCT solenoid, refer to Powertrain Control and Emissions Diagnosis (PC/ED) pinpoint test HK11 to cycle the affected VCT solenoid 10 times to attempt to clear the debris. For claiming, use causal part 6M280 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual.

BUICK, CADILLAC, CHEVROLET · 2019-10-02

N192266190 02 - Service Update - (Revised Service Procedure for XT5). Certain vehicles may have an engine control software issue that can occur during an automatic stop/start event. Immediately following an auto-start and while the vehicle is stopped, this condition can cause the engine to run rough, run at reduced power, or, in rare cases, stall. DTC?s P0011, P0021, P0014, and P0024 may set. Dealers will reprogram the engine control module (ECM).

BUICK, CADILLAC, CHEVROLET · 2019-09-20

N192266190 01 - Service Update. Certain 2018 model year Buick LaCrosse, Enclave, Cadillac XT5 and Chevrolet Traverse vehicles may have an engine control software issue that can occur during an automatic stop/start event. Immediately following an auto-start and while the vehicle is stopped, this condition can cause the engine to run rough, run at reduced power, or, in rare cases, stall. DTC?s P0011, P0021, P0014, and P0024 may set. Dealers will reprogram the engine control module (ECM).

BUICK, CADILLAC, CHEVROLET · 2019-09-18

N192266190 - Service Update. Certain vehicles may have an engine control software issue that can occur during a stop/start event that is causing drivability concerns such as the engine running roughly. Potential reduced engine power or engine stall with DTC?s P0011, P0021, P0014, and P0024 may set. Dealers will reprogram the engine control module (ECM).

CHEVROLET, GMC · 2019-08-30

This technical bulletin provides a procedure to Replace both camshaft position actuator valves to correct a condition of the engine runs rough, hesitates, hard to start, and or stalls. During diagnosis a technician may find DTCs P0010, P0013, P0011, P0014 set or stored due to camshaft position actuator solenoid valve failure.