P0339 · Comunicaciones del fabricante

HONDA · 2026-02-14

Service Bulletin - Affected vehicles may be equipped with an incorrectly machined engine block at the crankshaft position sensor (CKP) mounting location. Vehicles may experience a no start condition, low speed rough idle, engine RPM hunting, or have the following DTCs set: P0017 (Camshaft Position (CMP) Sensor B and Crankshaft Position (CKP) Sensor Correlation) and P0339 (Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption). This condition may affect a vehicle’s compliance with California and Federal emissions standards and regulations.

RAM · 2026-02-14

Flash: Powertrain Control Module (PCM) Updates **Customers may experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle may SYMPTOM: exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0300-00 - Multiple Cylinder Misfire - in Active or Stored status set during cold start catalyst heating. ● P0301-00 - Cylinder 1 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0302-00 - Cylinder 2 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0303-00 - Cylinder 3 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0304-00 - Cylinder 4 Misfire - in Active or Stored status set during cold start catalyst heating. ● P0305-00 - Cylinder 5 Misfire - in Active or Stored status…

HONDA · 2023-10-04

Service Bulletin - Affected vehicles may be equipped with an incorrectly machined engine block at the crankshaft position sensor (CKP) mounting location. Vehicles may experience a no start condition, low speed rough idle, engine RPM hunting, or have the following DTCs set: P0017 (Camshaft Position (CMP) Sensor B and Crankshaft Position (CKP) Sensor Correlation) and P0339 (Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption). This condition may affect a vehicle’s compliance with California and Federal emissions standards and regulations.

HONDA · 2023-10-04

Service Bulletin - The vehicle may experience a no start condition, low speed rough idle, engine RPM hunting, or have the following DTCs set P0017 (Camshaft Position (CMP) Sensor B and Crankshaft Position (CKP) Sensor Correlation) or P0339 (Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption).

HONDA · 2023-07-21

Service Bulletin - Affected vehicles may be equipped with an incorrectly machined engine block at the crankshaft position sensor (CKP) mounting location. Vehicles may experience a no start condition, low speed rough idle, engine RPM hunting, or have the following DTCs set: P0017 (Camshaft Position (CMP) Sensor B and Crankshaft Position (CKP) Sensor Correlation) and P0339 (Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption). This condition may affect a vehicle’s compliance with California and Federal emissions standards and regulations.

HONDA · 2023-07-21

Service Bulletin - The vehicle may experience a no start condition, low speed rough idle, engine RPM hunting, or have the following DTCs set P0017 (Camshaft Position (CMP) Sensor B and Crankshaft Position (CKP) Sensor Correlation) or P0339 (Crankshaft Position (CKP) Sensor Circuit Intermittent Interruption).

JEEP · 2023-06-15

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? **P02EE - CYLINDER 1 INJECTOR CIRCUIT PERFORMANCE. ? P02EF - CYLINDER 2 INJECTOR CIRCUIT PERFORMANCE. ? P02F0 - CYLINDER 3 INJECTOR CIRCUIT PERFORMANCE. ? P02F1 - CYLINDER 4 INJECTOR CIRCUIT PERFORMANCE. ** ? P0335 - Crankshaft Position Sensor Circuit. ? P0339 - Crankshaft Position Sensor Intermittent. ? P2C90 - Crankcase Ventilation System - Hose 9A9 Disconnected . ? P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). ? P0441 - EVAP Purge System Performance. ? P0607 - ECU Internal Performance. ? P0506 - Idle Speed…

CHRYSLER · 2023-02-22

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: Major monitor (misfire) and other diagnostics are disabled on a pending DTCs P0335 and P0339. ? **P0335 - Crankshaft Position Sensor Circuit (NA Only). ? P0339 - Crankshaft Position Sensor Intermittent (NA Only).** ? P06E4 - Control Module Wake-Up Circuit Performance. Software enhancement: Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states. ? Corrections to allow the vehicle to…

CHRYSLER · 2023-02-22

Flash: Powertrain Control Module (PCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: ? P0335 - Crankshaft Position Sensor Circuit (NA Only). ? P0339 - Crankshaft Position Sensor Intermittent (NA Only). Major monitor (misfire) and other diagnostics are disabled on a pending DTCs P0335 and P0339.** Software enhancement: Technicians and/or customers may report the vehicle will not pass a state smog check due to permanent fault codes which will not clear. As a result, the vehicles are not eligible to be registered in certain states. ? Corrections to allow the vehicle to clear the permanent fault codes. This bulletin involves…

RAM · 2023-02-03

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs:P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. Other software enhancement included with this update: Idle stability improvements during Electronic Stability Control (ESC) events.

JEEP · 2022-09-30

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more ofthe following DTCs: P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P2C90 - Crankcase Ventilation System - Hose "A" Disconnected. P04FC - Crankcase Ventilation System Performance. P0456 EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system. P061A - Level 2 Torque Performance. P0507 - Idle Speed Performance Higher Than Expected. Customers may also describe the following condition:Excessive…

FORD · 2022-09-14

Some 2020-2022 F-Super Duty vehicles equipped with a 6.2L or 7.3L gas engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0339 stored in the powertrain control module (PCM) or the vehicle may exhibit a runs rough concern with no DTCs. This may be due the crankshaft position (CKP) sensor. If pinpoint test JD in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual or Workshop Manual (WSM), Section 303-14 leads to CKP sensor replacement, use service part LC3Z-6C315-C. For claiming, use causal part 6C315 and labor operation 12650D57D in the Service Labor Time Standards (SLTS) Manual.

CHRYSLER · 2022-06-17

Flash: Powertrain Control Module (PCM) Updates This bulletin involves updating the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation, the technician may notice one or more of the following DTCs have been set: P1AC6-00 - MCPA Crankshaft Position Signal Sensor Performance. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0031 - O2 Sensor 1/1 Heater Circuit Low. P0032 - O2 Sensor 1/1 Heater Circuit High. P0037 - O2 Sensor 1/2 Heater Circuit Low. P0038 - O2 Sensor 1/2 Heater Circuit High. P0051 - O2 Sensor 2/1 Heater Circuit Low. P0052 - O2 Sensor 2/1 Heater Circuit High. P0057 - O2 Sensor 2/2 Heater Circuit Low. P0058 - O2 Sensor 2/2 Heater Circuit High.…

JEEP · 2022-06-15

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following (DTCs) have been set: P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P2C90 - Crankcase Ventilation System - Hose "A" Disconnected. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). P0441 - EVAP Purge System Performance. P0607 - ECU Internal Performance. P0506 - Idle Speed Performance Lower Than Expected

JEEP · 2022-06-15

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs have been set: P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P2C90 - Crankcase Ventilation System - Hose "A" Disconnected . P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). P02EE - Cylinder 1 Injector Circuit Performance. P02EF - Cylinder 2 Injector Circuit Performance. P02F0 - Cylinder 3 Injector Circuit Performance. P02F1 - Cylinder 4 Injector Circuit Performance. P0441 - EVAP Purge System Performance. P0607 - ECU Internal Performance.…

JEEP · 2022-06-14

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following DTCs: P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P2C90 - Crankcase Ventilation System - Hose "A" Disconnected. P061A - Level 2 Torque Performance. P0607-00 - ECU Internal Performance. P2172 - High Airflow/Vacuum Leak Detected (Instantaneous Accumulation). P02EE - Cylinder 1 Injector Circuit Performance. P02EF - Cylinder 2 Injector Circuit Performance. P02F0 - Cylinder 3 Injector Circuit Performance. P02F1 - Cylinder 4 Injector Circuit Performance. P012A -…

FORD · 2022-01-11

Some 2020-2022 F-Super Duty vehicles equipped with a 6.2L or 7.3L gas engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0339 stored in the powertrain control module (PCM) or the vehicle may exhibit a runs rough concern with no DTCs. This may be due to a concern with contamination on the crankshaft position (CKP) sensor. If pinpoint test JD in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual leads to CKP sensor replacement, inspect the sensor for contamination and document the results in the warranty claim. Use causal part 6C315 and utilize labor operation 12650D57D in the Service Labor Time Standards (SLTS) Manual.

CHRYSLER · 2021-05-22

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1AC6-00 - MCPA Crankshaft Position Signal Sensor Performance. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0031 - O2 Sensor 1/1 Heater Circuit Low. P0032 - O2 Sensor 1/1 Heater Circuit High. P0037 - O2 Sensor 1/2 Heater Circuit Low. P0038 - O2-Sensor 1/2 Heater Circuit High. P0051 - O2-Sensor 2/1 Heater Circuit Low. P0052 - O2-Sensor 2/1 Heater Circuit High. P0057 - O2 Sensor 2/2 Heater Circuit Low. P0058 - O2-Sensor…

CHRYSLER · 2021-05-22

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) have been set: P1AC6-00 - MCPA Crankshaft Position Signal Sensor Performance. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0031 - O2 Sensor 1/1 Heater Circuit Low. P0032 - O2 Sensor 1/1 Heater Circuit High. P0037 - O2 Sensor 1/2 Heater Circuit Low. P0038 - O2-Sensor 1/2 Heater Circuit High. P0051 - O2-Sensor 2/1 Heater Circuit Low. P0052 - O2-Sensor 2/1 Heater Circuit High. P0057 - O2 Sensor 2/2 Heater Circuit Low. P0058 - O2-Sensor…

ALFA ROMEO, DODGE, FIAT, JEEP · 2021-01-29

CEL, Check Engine Lamp On, DTC P0339 Crankshaft Position Sensor Intermittent

FORD · 2020-12-21

Some 2020-2021 F-Super Duty vehicles equipped with a 6.2L or 7.3L gas engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0339 stored in the powertrain control module (PCM) or the vehicle may exhibit a runs rough concern with no DTCs. This may be due to a concern with contamination on the crankshaft position (CKP) sensor. If pinpoint test JD in the Powertrain Control/Emissions Diagnosis (PC/ED) Manual leads to CKP sensor replacement, inspect the sensor for contamination and document the results in the warranty claim. Use causal part 6C315 and utilize labor operation 12650D57D in the Service Labor Time Standards (SLTS) Manual.

RAM · 2020-11-03

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) has been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P258B - Electronic Vacuum Pump Performance. P0456 - EVAP System Small Leak. If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system.The customer may comment on one or more of the following:ECO light does not illuminate in the instrument cluster during Multiple Displacement Solenoid (MDS) event. 2-3 km (1.4…

RAM · 2020-11-03

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) has been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P258B - Electronic Vacuum Pump Performance. P0456 - EVAP System Small Leak. If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system.The customer may comment on one or more of the following:ECO light does not illuminate in the instrument cluster during Multiple Displacement Solenoid (MDS) event. 2-3 km (1.4…

RAM · 2020-10-30

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) have been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. P258B - Electronic Vacuum Pump Performance. The customer may experience one or more of the following:ECO light does not illuminate in the instrument cluster during MultipleDisplacement Solenoid (MDS) event. 2-3 km (1.4…

RAM · 2020-10-30

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or moreof the following Diagnostic Trouble Codes (DTCs) have been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT)to determine if a leak is present in the system. P258B - Electronic Vacuum Pump Performance. The customer may experience one or more of the following:ECO light does not illuminate in the instrument cluster during MultipleDisplacement Solenoid (MDS) event. 2-3 km (1.4…

JEEP · 2020-10-28

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find oneor more of the following Diagnostic Trouble Codes (DTCs).P0369 - Camshaft Position Sensor Intermittent - Bank 1 Sensor 2. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0344 - Camshaft Position Sensor Intermittent. P0390 - Camshaft Position Sensor Circuit - Bank 2 Sensor 2. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0365 - Camshaft Position Sensor Circuit - Bank 1 Sensor 2. P0345 - Camshaft Position Sensor Circuit - Bank 2 Sensor 1. P0349 -…

JEEP · 2020-10-28

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the Powertrain Control Module (PCM) with thelatest available software. The customer may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find one or more of the following Diagnostic Trouble Codes (DTCs).P0369 - Camshaft Position Sensor Intermittent - Bank 1 Sensor 2. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. P0344 - Camshaft Position Sensor Intermittent. P0390 - Camshaft Position Sensor Circuit - Bank 2 Sensor 2. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0365 - Camshaft Position Sensor Circuit - Bank 1 Sensor 2. P0345 - Camshaft Position Sensor Circuit - Bank 2 Sensor 1. P0349 -…

RAM · 2020-09-03

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs has been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P258B - Electronic Vacuum Pump Performance. P0456 - EVAP System Small Leak. If DTC P0456 is present use the wiTECH Small Leak Verification Test (SLVT) to determine if a leak is present in the system.The customer may comment on one or more of the following:?Ready Not Ready? appearing message in the Electronic Vehicle Information Center (EVIC) while driving and before an Engine Stop Start (ESS)…

JEEP · 2020-09-01

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that the following DTCs have been set:C050D - Wheel Speed Signal Left Rear Rationality.C0501 - Wheel Speed Signal Left Front Rationality. C0507 - Wheel Speed Signal Right Front Rationality. C0513 - Wheel Speed Signal Right Rear Rationality. P0340 - Camshaft Position Sensor Circuit - Bank 1 Sensor 1. P0335 - Crankshaft Position Sensor Circuit. P0339 - Crankshaft Position Sensor Intermittent. In addition, customers may experience the following concern:When using the adaptive cruise control and coming to a complete stop, the MIL light…

RAM · 2020-09-01

Flash: Powertrain Control Module (PCM) Updates This bulletin involves reprogramming the PCM with the latest available software. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find that one or more of the following DTCs have been set:P0339 - Crankshaft Position Sensor Intermittent. P0335 - Crankshaft Position Sensor Circuit. P0456 - EVAP System Small Leak.If DTC P0456 is present use the wiTECH Small Leak Verification test (SLVT) to determine if a leak is present in the system. P258B - Electronic Vacuum Pump Performance. The customer may experience one or more of the following:The engine may exhibit a crank and fail to start situation. The vehicle has a rough idle only after cold start. The radiator cooling fan is…