P062B · Comunicaciones del fabricante

CADILLAC, CHEVROLET, GMC · 2023-11-13

This engineering informational bulletin is requesting information from technicians to perform the check list provided and contact the engineer listed in regard to having a No Crank, No Start, Check Engine Lamp illuminated on Driver Information Center (DIC), DTC P062B Set.

FORD · 2022-10-19

Some 2019-2021 F-150 vehicles built on or before 04-Mar-2021 and equipped with a 5.0L engine may experience an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0171, P0172, P0174, P0175, P0364, P060B, P062B, P1104, P164C, P2601, P2BEC, P2BED, P2BEE, P2BEF, P2BF0, P2BF1, P2BF2 and/or P2BF3 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).

FORD · 2021-08-03

Some 2021 Bronco Sport vehicles equipped with a 1.5L EcoBoost engine may exhibit a no crank/no start start condition with an illuminated malfunction indicator lamp (MIL) and one or more of the following diagnostic trouble codes (DTC): P093B, P2282, P0420, P062B, P21D1, P21D0, P21CF, P0710, and/or P0712. This may be due to a damaged wiring harness at the transmission cover. If damage is found, repair as necessary. Refer to Wiring Diagram Cell 005.

FORD · 2021-05-18

Some 2021 F-150 vehicles equipped with a 5.0L engine and built on or before 04-Mar-2021 may experience an illuminated malfunction indicator lamp (MIL) and diagnostic trouble codes (DTC) P0364, P060B, P062B, P164C, P2601, P0171, P0172, P0174, P0175 and/or P1104 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).

FORD · 2021-03-22

Some 2021 F-150 vehicles equipped with a 5.0L engine and built on or before 08-Mar-2021 may experience an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTC) P0364, P060B, P062B, P164C, P2601, P0171, P0172, P0174, P0175, P3450 and/or P1104 stored in the powertrain control module (PCM). This may be due to various software parameters within the PCM. To correct the condition, follow the Service Procedure to reprogram the PCM and reset the keep alive memory (KAM).

CADILLAC, CHEVROLET, GMC · 2018-11-02

This Preliminary information communicates to the dealer an issue where the vehicle's service engine soon light may illuminate due to trouble codes P0601-P0604, P0606, P062B, P062F, P0630, P16F3, or P262B . The dealer is to inspect the engine control module's electrical connections and for proper powers and grounds. Dealer instructed to replace the Engine Control Module, if no other issues found.

CHEVROLET · 2018-01-23

18009 - Service Update. The bootloader version for the engine control module (ECM) was incorrectly released, and may result in a no-start or stall, and P062B, P0171/P0172, P1133/P2195/P2196 or P300 diagnostic trouble codes to set. Dealers are to inspect for part number and replace the ECM as needed.

FORD · 2015-01-09

FORD: CERTAIN F-150 TRUCKS AND MUSTANGS EQUIPPED WITH 3.5L PFI AND 5.0L PFI ENGINES MAY DISPLAY DIAGNOSTIC CODE P062B (INTERNAL CONTROL MODULE FUEL INJECTOR CONTROL PERFORMANCE). *TA

JEEP · 2014-03-21

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience a condition that the Oil Life Monitor shows faster then expected oil life deterioration. Software enhancements will address this issue. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble Code(s) may have been set: ? P0073 - AMBIENT AIR TEMPERATURE SENSOR CIRCUIT HIGH ? P0088 - FUEL RAIL PRESSURE TOO HIGH ? P016F - CLOSED LOOP FUEL PRESSURE CONTROL AT LIMIT - PRESSURE TOO LOW ? P0420 - CATALYST EFFICIENCY (BANK 1) ? P0426 - CATALYST TEMPERATURE SENSOR CIRCUIT…

JEEP · 2014-03-18

Flash: MIL Illumination - Diagnostic and System Improvements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. Some customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find that any of the following Diagnostic Trouble Code(s) may have been set: ? P0073 - AMBIENT AIR TEMPERATURE SENSOR CIRCUIT HIGH ? P0088 - FUEL RAIL PRESSURE TOO HIGH ? P016F - CLOSED LOOP FUEL PRESSURE CONTROL AT LIMIT - PRESSURE TOO LOW ? P0420 - CATALYST EFFICIENCY (BANK 1) ? P0426 - CATALYST TEMPERATURE SENSOR CIRCUIT PERFORMANCE (BANK 1 SENSOR 1) ? P05F8 - REDUCTANT HEATER CONTROL MODULE PERFORMANCE ? P061B - INTERNAL CONTROL MODULE TORQUE CALCULATION PERFORMANCE ? P062B - INTERNAL…

BUICK, CHEVROLET, GMC · 2010-09-01

BUICK/CHEVROLET/GMC: MALFUNCTION INDICATOR LAMP (MIL) ON; DTC P0300, P0303, P0306, P062B, P0698, P0532, P0335, P0222 OR P0122 SET, ENGINE HARNESS CHAFFING. CONCERN MAY BE CAUSED BY ENGINE WIRING HARNESS MAKING CONTACT WITH BACK OF BANK 2 CYLINDER HEAD. *PE