U0186 · Comunicaciones del fabricante

MAZDA · 2025-02-05

Some customers may complain about intermittent audio no sound from the MAZDA CONNECT infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the MAZDA CONNECT center display and the following DTC's may be stored. U0186:08 Communication error with audio amplifier • U2145:08 Communication error with remote tuner (RT) • U2145:02 Communication error with remote tuner (RT)

MAZDA · 2024-05-07

Some customers may complain about intermittent audio no sound from the MAZDA CONNECT infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the MAZDA CONNECT center display and the following DTC's may be stored. U0186:08 Communication error with audio amplifier U2145:08 Communication error with remote tuner (RT) U2145:02 Communication error with remote tuner (RT)

MAZDA · 2024-04-09

Some customers may complain about intermittent audio no sound from the MAZDA CONNECT infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the MAZDA CONNECT center display and the following DTC's may be stored. U0186:08 Communication error with audio amplifier U2145:08 Communication error with remote tuner (RT) U2145:02 Communication error with remote tuner (RT)

MAZDA · 2022-11-01

Some customers may complain about intermittent audio no sound from the MAZDA CONNECT infotainment system and/or static noise from the speakers. The concern may be reproduced by tapping on the dash pad near the MAZDA CONNECT center display and the following DTC's may be stored. * U0186:08 Communication error with audio amplifier * U2145:08 Communication error with remote tuner (RT) * U2145:02 Communication error with remote tuner (RT) This may be caused by PIN 6F backing out at the CMU connector 0920-101F.

MAZDA · 2022-08-19

Some customers may expierience infotainment static or no audio sound and the following DTC's may be stored: - U2145:08 - Communication error with remote tuner (RT) - U0186:08 - Communication error with audio amplifier This may be caused by poor electrical connection at connector 0920-114 and/or 0920-115D (Rear Harness Side).

CADILLAC, CHEVROLET, GMC · 2020-11-17

This Preliminary information communicates a customer concern of IPC gauges inoperative or fluctuate, No Start, No Crank, SIR Light / Service Airbag Message, Service Suspension Message, Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback, HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164, U0184, U0186, U0198, U0422. Dealer is instructed to check for logic lock of Serial Data Gateway Module or for Serial Data Gateway Module X1 and X2 connectors having terminal concerns and repair as needed.

CADILLAC, CHEVROLET, GMC · 2020-11-05

This Preliminary information communicates a customer concern of IPC gauges inoperative or fluctuate, No Start, No Crank, SIR Light / Service Airbag Message, Service Suspension Message, Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback, HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164, U0184, U0186, U0198, U0422. Dealer is instructed to check for logic lock of Serial Data Gateway Module or for Serial Data Gateway Module X1 and X2 connectors having terminal concerns and repair as needed.

CADILLAC, CHEVROLET, GMC · 2020-10-01

This Preliminary information communicates a customer concern of IPC gauges inoperative or fluctuate, No Start, No Crank, SIR Light / Service Airbag Message, Service Suspension Message, Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback, HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164, U0184, U0186, U0198, U0422. Dealer is instructed to check for logic lock of Serial Data Gateway Module or for Serial Data Gateway Module X1 and X2 connectors having terminal concerns and repair as needed.

CADILLAC, CHEVROLET, GMC · 2020-03-11

This Preliminary information communicates a customer concern of IPC gauges inoperative or fluctuate, No Start, No Crank, SIR Light / Service Airbag Message, Service Suspension Message, Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback, HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164, U0184, U0186, U0198, U0422. Dealer is instructed to check Serial Data Gateway Module X2 connector for terminal concerns and repair as needed.

CADILLAC, CHEVROLET, GMC · 2019-06-24

This Preliminary information communicates a customer concern of IPC gauges inoperative or fluctuate, No Start, No Crank, SIR Light / Service Airbag Message, Service Suspension Message, Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback, HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164, U0184, U0186, U0198, U0422. Dealer is instructed to check Serial Data Gateway Module X2 connector for terminal concerns and repair as needed.

CHEVROLET · 2019-03-05

This Preliminary Information communication provides information to the technician about vehicles that have multiple Instrument Panel Cluster warning indicators on and/or warning messages being displayed on the Driver Information Center. Technician may find Diagnostic Trouble Codes U0073, U0077, U0078, U0121, U0126, U0151, U0155, U0164, U0186, U0415, U0422, and U0428. Technician will need to inspect for a pinch DLC branch in the Instrument Panel harness behind the Instrument Panel Carrier.

CADILLAC, CHEVROLET, GMC · 2018-08-27

This Preliminary information communicates a customer concern ofIPC gauges inoperative or fluctuate, No Start,No Crank,SIR Light / Service Airbag Message, Service Suspension Message,Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback,HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164,U0184, U0186, U0198, U0422. Dealer is instructed to check Serial Data Gateway Module X2 connector for terminal concerns and repair as needed.

CADILLAC, CHEVROLET, GMC · 2018-03-27

This Preliminary information communicates a customer concern ofIPC gauges inoperative or fluctuate, No Start,No Crank,SIR Light / Service Airbag Message, Service Suspension Message,Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback,HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164,U0184, U0186, U0198, U0422. Dealer is instructed to check Serial Data Gateway Module X2 connector for terminal concerns and repair as needed.

CADILLAC, CHEVROLET, GMC · 2017-10-02

This Preliminary information communicates a customer concern ofIPC gauges inoperative or fluctuate, No Start,No Crank,SIR Light / Service Airbag Message, Service Suspension Message,Radio display blank, Steering Wheel Controls (SWC) not illuminated, Turn Signal no audible feedback,HVAC controls inoperative. During diagnostics a technician may find any of the following DTC's: B1011, B1370, B3980, U0020, U0029, U007D, U0073, U0078, U0100, U0101, U0102, U0104, U0140, U0151, U0155, U0164,U0184, U0186, U0198, U0422. Dealer is instructed to check Serial Data Gateway Module X2 connector for terminal concerns and repair as needed.

ALFA ROMEO · 2017-08-03

Audio System Warning Light Illuminated This bulletin involves checking and installing a protective cover on the amplifier. The customer may describe that the when the audio system warning light is illuminated the radio will turn on but with no audio sound.Upon further investigation the technician may find that the following Diagnostic Trouble Codes (DTCs) have been set:U1746-87 - AMP (Amplifier Module)-Missing Message. B10AA-4A - Check Configuration Failed-Incorrect Component Installed. U197C-83 - Message Transm2 Plausibility Error-Value Of Signal Protection Calculation Incorrect. U0186-31 - Lost Communication With Audio Amplifier - No Signal.

CHEVROLET · 2015-12-04

This Preliminary Information communication provides information to the technician about vehicles that have a radio and/or audio is inoperative or intermittently inoperative. Technician may find Diagnostic Trouble Code U0186. Technician should inspect amplifier X1 terminal 4 (circuit 1140) and X1 terminal 8 (circuit 1450) for spread terminals, broken terminals, connectors/terminals not fully seated, and faulty terminal crimps. Technician will need to repair any wiring damage that is found.

CHEVROLET · 2013-08-22

This Preliminary Information communication provides information to the technician about vehicles that have multiple Instrument Panel Cluster warning indicators on and/or warning messages being displayed on the Driver Information Center. Technician may find Diagnostic Trouble Codes U0073, U0077, U0121, U0126, U0151, U0155, U0164, U0186, U0415, U0422, and U0428. Technician will need to inspect for a pinch DLC branch in the Instrument Panel harness behind the Instrument Panel Carrier.