MERCEDES-BENZ, MERCEDES-MAYBACH

LI46.80-P-072750

2022-01-06 · NHTSA 10207196

सूची में वाहन का होना जाँच की शुरुआत है। निर्माता की जानकारी में इंजन, उत्पादन अवधि और सॉफ़्टवेयर जाँचें।

निर्माता सारांश

मूल अंग्रेज़ी विवरण

Complaint The fault code C112502 is logged (as current or stored) in the rear axle control unit (N68/4). Cause The fault code is caused by communication with the ESP control unit: 1. After carrying out a quick test or performing a diagnosis on the ESP control unit (N30/3): This fault code occurs in the ESP control unit (N30/3) as a result of the diagnosis performed with XENTRY Diagnosis. At the point of diagnosis, the ESP control unit (N30/3) sends the value "ERROR" on the FlexRay. The rear axle steering control unit (N68/4) is not able to process this value and logs the fault code C112502. 2. As a result of a fault code logged in the ESP control unit (N30/3): As a result of the fault code logged in the ESP control unit (N30/3), the ESP control unit (N30/3) sends the value "ERROR" on the FlexRay and the rear axle steering (N68/4) switches to the safe mode provided for this purpose. Remedy Re. cause 1: If fault code C112502 does not occur until after a quick test or after a diagnosis performed directly in the ESP control unit (N30/3), the fault code can be ignored and deleted directly in the rear axle steering control unit (N68/4). If the fault code is current, perform an ignition off/on so that the fault code is only registered as stored. Re. cause 2: If fault code C112502 is already present when the first quick test is carried out, check and process the fault code(s) in the ESP control unit (N30/3). Here too, the fault code can be ignored and deleted directly in the rear axle steering control unit (N68/4).

केवल समान निर्माता, नंबर, तारीख और पूरे सारांश की प्रविष्टियाँ समूहित हैं। मूल नंबर और पुराने दस्तावेज सुरक्षित हैं; पुष्ट स्पष्ट प्रतिस्थापन दिखते हैं। 1994 से पहले के संबंध सामान्य परिणामों से अलग हैं। वर्ष न बताया जाना सभी वर्षों का समर्थन नहीं है।