देखें

बॉडी

B14F0

कोड का अर्थ और निर्माता जानकारी

OBD-II / DTC

संदर्भ अर्थ

इस कोड का क्या अर्थ है?

विवरण दिए निर्माता और दस्तावेज का है। पूरा कोड, मॉड्यूल, वर्ष और इंजन मिलाएँ।

कोड किसी पाई गई स्थिति को बताता है, अपने-आप किसी पुर्जे को बदलने का आदेश नहीं देता।

वाहन से सीमित करें

सूची में वाहन का होना जाँच की शुरुआत है। निर्माता की जानकारी में इंजन, उत्पादन अवधि और सॉफ़्टवेयर जाँचें।

पुर्जा बदलने से पहले

कोड और फ़्रीज़ फ़्रेम दर्ज करें। बैटरी, संबंधित कोड और तार या होज़ की दिखती क्षति जाँचें। पुर्जा बदलने से पहले वाहन की प्रक्रिया और परीक्षण परिणाम अपनाएँ।

स्कैन रिकॉर्ड शीट →

निर्माता की तकनीकी जानकारी

9

मूल अंग्रेज़ी विवरण

सभी देखें ↗

SA-043-25 ↗

MAZDA

Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles] B14F0:92 - General temporary failure in forward sensing camera (FSC) [Gen …

SA-066-22 ↗

MAZDA

Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: * C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles] * B14F0:92 - General temporary failure in forward sensing camera (FSC) […

SA-036-21 ↗

MAZDA

Some vehicles may have one of the following DTCs stored in memory along with a system status notice on the Multi-information display OR display a system status notice with no DTC: C1001:92 - Forward sensing camera (FSC) poor field of view [Gen 6 vehicles], B14F0:92 - General temporary failure in forward sensing camera (FSC) [Gen…

SA-046-20b ↗

MAZDA

FORWARD SENSING CAMERA (FSC) DYNAMIC AIMING NOT COMPLETED AND/OR DTC B14F0:76 STORED. CAUTION: DO NOT turn the igintion OFF after dynamic aiming starts until aiming has completed or aiming timeout. If the ignition is turned OFF, the VCM will store B14F0:76 and FSC aiming will not complete. FSC dynamic aiming (mid-drive aiming) m…

वाहन पर लागू होने की जाँच

84

सूची में वाहन का होना जाँच की शुरुआत है। निर्माता की जानकारी में इंजन, उत्पादन अवधि और सॉफ़्टवेयर जाँचें।

सभी देखें ↗

निर्मातामॉडलमॉडल वर्ष
Mazda!MX-5 ↗2019
MazdaCX-3 ↗2021
MazdaCX-3 ↗2020
MazdaCX-3 ↗2019
MazdaCX-3 ↗2018
MazdaCX-3 ↗2017
MazdaCX-3 ↗2016
MazdaCX-30 ↗2026

क्या गाड़ी चलाना जारी रख सकते हैं?

केवल कोड से सुरक्षित ड्राइविंग तय नहीं होती। चमकती चेतावनी, तेज कंपन, ओवरहीटिंग, तेल दबाव चेतावनी या ब्रेक/स्टीयरिंग में कमी पर ध्यान दें। नियंत्रण या इंजन सुरक्षा प्रभावित हो तो सुरक्षित जगह रुकें और मदद लें। वाहन पुस्तिका मानें।