AUDI · 2022-06-16
This bulletin contains a software update to address a red steering warning light with DTC C10AC07 stored.
C10AC · निर्माता की तकनीकी जानकारी
सूची में वाहन का होना जाँच की शुरुआत है। निर्माता की जानकारी में इंजन, उत्पादन अवधि और सॉफ़्टवेयर जाँचें।
C10AC ← इस कोड का क्या अर्थ है?11 परिणाम
AUDI · 2022-01-31
This bulletin contains a software update to address a red steering warning light with DTC C10AC07 stored.
AUDI · 2021-12-14
This bulletin contains a software update to address a red steering warning light with DTC C10AC07 stored.
AUDI · 2021-11-04
This bulletin contains a software update to address a red steering warning light with DTC C10AC07 stored.
AUDI · 2021-09-02
This bulletin contains a software update to address a red steering warning light with DTC C10AC07 stored.
AUDI · 2021-07-15
This bulletin contains a software update to address a red steering warning light with DTC C10AC07 stored.
AUDI · 2021-06-18
This bulletin states to delete the DTC and release the vehicle if DTC C10AC07 is stored in the power steering control module with one of the following symptom codes 24320, 24321, 24322, 24323, 24324, or 24325.
AUDI · 2021-04-30
This bulletin states to delete the DTC and release the vehicle if DTC C10AC07 is stored in the power steering control module with one of the following symptom codes 24320, 24321, 24322, 24323, 24324, or 24325.
BENTLEY · 2018-09-07
Steering malfunction message displayed on dash, DTC 'C10AC07-Steering mechanical malfunction' stored
BENTLEY · 2018-08-07
Steering malfunction message displayed on dash, DTC 'C10AC07-Steering mechanical malfunction' stored
AUDI · 2013-09-09
Supersedes Technical Service Bulletin Group 48 number 13-35 dated February 14, 2013. The yellow steering symbol is illuminated in the instrument cluster. DTC C10ACF0 (steering end stops not programmed) is logged in the power steering control module, J500 (address word 44). The power steering control module expects to receive a VIN message over the data bus shortly after terminal 15 is turned on. If the VIN message is not received at the expected time, the power steering control module assumes it has been installed in a new vehicle, and it discards the programmed end position values.