P287C · निर्माता की तकनीकी जानकारी

ACURA · 2016-03-01

Replacement TCMs don?t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in.

HONDA · 2016-03-01

Replacement TCMs don?t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in.

HONDA · 2016-03-01

Replacement TCMs don’t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in. This happens because the TCM is programmed to look for trim data any time the ignition is cycled. If the TCM doesn’t see that trim data, it sets A/T DTC P287C. If any DTCs are set, the TCM won’t initiate teach-in and, as a result, can’t learn the trim data. It’s a classic catch-22 situation.

ACURA · 2016-03-01

Replacement TCMs don’t come with trim data. After installation, you need to run a teach-in (hydraulic pressure characteristic calibration) procedure with the HDS. The problem is that A/T DTC P287C (transmission adaptive values not learned) is set, which prevents teach-in. This happens because the TCM is programmed to look for trim data any time the ignition is cycled. If the TCM doesn’t see that trim data, it sets A/T DTC P287C. If any DTCs are set, the TCM won’t initiate teach-in and, as a result, can’t learn the trim data. It’s a classic catch-22 situation.

ACURA · 2015-11-20

TECHLINE SUMMARY ARTICLE - REPLACEMENT TCMS DON’T COME WITH TRIM DATA. AFTER INSTALLATION, YOU NEED TO RUN A TEACH-IN (HYDRAULIC PRESSURE CHARACTERISTIC CALIBRATION) PROCEDURE WITH THE HDS. THE PROBLEM IS THAT A/T DTC P287C (TRANSMISSION ADAPTIVE VALUES NOT LEARNED) IS SET, WHICH PREVENTS TEACH-IN.

HONDA · 2015-11-19

TECHLINE SUMMARY ARTICLE - REPLACEMENT TCMS DON’T COME WITH TRIM DATA. AFTER INSTALLATION, YOU NEED TO RUN A TEACH-IN (HYDRAULIC PRESSURE CHARACTERISTIC CALIBRATION) PROCEDURE WITH THE HDS. THE PROBLEM IS THAT A/T DTC P287C (TRANSMISSION ADAPTIVE VALUES NOT LEARNED) IS SET, WHICH PREVENTS TEACH-IN.