U0233 · निर्माता की तकनीकी जानकारी

FORD, LINCOLN · 2024-06-06

This article supersedes 24-2028 to update the vehicle symptom. Some 2022-2024 Expedition/Navigator vehicles may exhibit a random "Blind Spot Not Available Sensor Blocked" and/or "Cross Traffic Alert Not Available Sensor Blocked" warning messages in the IPC with no vehicle or objects near the vehicle. This condition may be intermittent, more noticeable in wet conditions. Diagnostic trouble codes B13F3:97 in the side obstacle detection control module - left (SODL) and/or B13F4:97 in the side obstacle detection control module - right (SODR) and/or U0233 and U0232 in the image processing module A (IPMA) may also be present. This may be due to a mud/snow/ice build-up between the radar sensor and the rear bumper cover or damage or corrosion to the radar sensor, connector or harness. To correct…

FORD, LINCOLN · 2024-03-11

This article supersedes 23-2266 to update the vehicle model years affected to include 2024 model year. Some 2022-2024 Expedition/Navigator vehicles may exhibit a random BLIS warning with no vehicle or objects near the vehicle. This condition may be intermittent, more noticeable in wet conditions. Diagnostic trouble codes B13F3:97 in the side obstacle detection control module - left (SODL) and/or B13F4:97 in the side obstacle detection control module - right (SODR) and/or U0233 and U0232 in the image processing module A (IPMA) may also be present. This may be due to a mud/snow/ice build-up between the radar sensor and the rear bumper cover or damage or corrosion to the radar sensor, connector or harness.

TOYOTA · 2019-05-13

TSB: Some 2016 ? 2018 model year Tacoma vehicles may exhibit a Blind Spot Monitor System Warning message with any of the following Diagnostic Trouble Codes (DTCs) present. ? U0232 ? Lost Communication with Blind Spot Monitor Slave Module ? U0233 ? Lost Communication with Blind Spot Monitor Master Module ? C1AC1 ? Master Module Horizontal Axis Misalignment ? C1AC2 ? Slave Module Horizontal Axis Misalignment ? C1AB6 ? Blind Spot Monitor Master Module ? C1AB7 ? Blind Spot Monitor Slave Module. Follow the Repair Procedure in this bulletin to address this condition.

BUICK, CHEVROLET, GMC · 2016-06-02

THIS TECHNICAL BULLETIN PROVIDES A PROCEDURE TO REPLACE THE SIDE BLIND ZONE MODULE HARNESS AND BOTH MODULES TO CORRECT A CUSTOMER CONCERN THAT THE SERVICE SIDE DETECTION SYSTEM MESSAGE IS DISPLAYED IN THE DIC OR DTC U0232, U0233 MAY BE SET DUE TO WATER INTRUSION.

CHEVROLET · 2016-01-06

Engineering Information – Service Side Detection System Message Displayed and/or DTCs B101D, U0232 and/or U0233 Set If you encounter a vehicle with this concern, please refer to SI diagnostics

CHEVROLET · 2015-08-28

This engineering information bulletin is requesting information from dealers on a customer concern of a Service Side Detection System message displayed on the Driver Information Center (DIC) or that the side detection system is inoperative. During diagnosis, a technician may find DTCs B101D, U0232 and/or U0233 set.

LAND ROVER · 2013-10-06

"ISSUE: SIDE OBJECT DETECTION DIAGNOSTIC TROUBLE CODES (DTCS) U0233-00 & U0232-00 STORED IN FRONT CONTROL DISPLAY INTERFACE MODULE (FCDIM) WHERE A VEHICLE DOES NOT HAVE THE BLIND SPOT MONITORING OPTION FITTED. CAUSE: CONFIGURATION MIS-MATCH BETWEEN FCDIM & VEHICLE CONFIGURATION FILE THAT MAY CAUSE DTCS U0233-00 ‘LOST COMMUNICATION WITH THE RIGHT SIDE OBSTACLE DETECTION CONTROL MODULE’ & U0232-00 ‘LOST COMMUNICATION WITH THE LEFT SIDE OBSTACLE DETECTION MODULE’ TO BE STORED UNNECESSARILY."