U0300 · निर्माता की तकनीकी जानकारी

JEEP · 2025-05-16

"Flash: Air Suspension Control Module (ASCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Code (DTC): ● U0300-00 - Internal Control Module Software Incompatibility. Customers may also experience:** ● After towing a heavy load above the protection limit, the air suspension will only lower and will remain in low ride height. Instrument Panel Message (IPC) message ""selected ride height not permitted due to payload"" appears. This bulletin involves reprogramming the ASCM with the latest available software."

JEEP · 2025-04-30

"Flash: Air Suspension Control Module (ASCM) Updates **Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set the following Diagnostic Trouble Codes (DTC): ● U0300 - Internal Control Module Software Incompatibility.** Customers may experience one or more of the following: ● Ride height disabled. ● Suspension will lower, but will not raise. ● Instrument Panel Message (IPC) message ""selected ride height not permitted due to payload"" appears. This bulletin involves reprogramming the ASCM with the latest available software. "

NISSAN · 2023-12-13

ESM DIAGNOSTIC PROCEDURE UPDATE FOR DTC U0300 STORED IN TCM SERVICE INFORMATION The Electronic Service Manual (ESM) Diagnostic Procedure will be updated with additional information for diagnosing DTC U0300, for "CAN COMM DATA", if stored in the TCM. Refer to page 2 in this bulletin for updated Diagnostic Procedure. HINT: DTC can possibly be stored after TCM programming with CVT replacement / TCM replacement.

JEEP · 2023-06-30

Flash: Air Suspension Control Module (ASCM) Updates Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technician may find the following Diagnostic Trouble Code (DTC). ? U0300-00 - Internal Control Module Software Incompatibility-. Customers may experience one or more of the following: ? Manual leveling requests are inoperative. ? Vehicle will raise to off-road 2. This bulletin involves reprogramming the ASCM with the latest available software.

AUDI · 2023-05-09

This bulletin provides a software update for when "All Wheel Drive Malfunction Message" is displayed in the instrument cluster and DTC U030000 is logged.

JEEP · 2022-05-19

Air Suspension Control Module (ASCM) Updates For Diagnostic Trouble Code (DTC) U0300-00 This bulletin involves informing the technician about reprogramming the ASCM with the latest available software after replacement of the new ASCM only. The replacement ASCM will set DTC: U0300-00 - Internal Control Module Software Incompatibility-.

MAZDA · 2022-03-11

Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. *DO NOT perform BCM software update with MDARS until further notice. *This SA will be updated with the newest…

MAZDA · 2022-03-04

Mazda3 and CX-30: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. •DO NOT perform BCM software update with MDARS until further notice. •This SA will be updated with the newest…

MAZDA · 2022-02-09

CX-30. Mazda3: Prior to February 8, 2022, some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT). This is caused by a BCM-VCM software error. Customers having this concern should have their vehicle repaired using the following repair procedure. MX-30: Some MX-30 vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) and cannot be erased after a BCM replacement or MDARS BCM software update. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. DO NOT…

MAZDA · 2022-02-04

Some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT) and the DTC cannot be erased. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, contact Hotline for newest repair information. DO NOT perform BCM software update with MDARS until further notice, including CSP06 and CSP07. This SA will be updated with the newest repair information as it becomes available.

MAZDA · 2022-01-21

Some vehicles may store DTC U0300:57 (Body control module (BCM) internal malfunction) after a BCM replacement or MDARS BCM software update (NOT with BCM update for SSPC5 or 4621B using MDRT) and the DTC cannot be erased. This is caused by a BCM-VCM software error. Mazda is aware of the issue and is working on a resolution. If there is an issue with this concern, Mazda recommends putting customer in a loaner vehicle at this time. •DO NOT perform BCM software update with MDARS until further notice, including CSP06 and CSP07. •This SA will be updated with the newest repair information as it becomes available.

AUDI · 2021-11-12

This bulletin contains instructions for when DTC U030000 appears and “All Wheel Drive Malfunction Message” is displayed in the instrument cluster.

JEEP · 2021-08-16

ASCM DTC U0300 Internal Control Module Incompatibility

JEEP · 2021-08-16

ASCM DTC U0300 Internal Control Module Incompatibility

JEEP · 2021-07-23

ASCM DTC U0300 Internal Control Module Incompatibility

AUDI · 2020-03-17

This bulletin contains instructions for when DTC U030000 appears and 'All Wheel Drive Malfunction Message' is displayed in the instrument cluster.

AUDI · 2018-11-26

This bulletin contains instructions for when DTC U030000 appears and ?All Wheel Drive Malfunction Message? is displayed in the instrument cluster.

AUDI · 2018-02-19

This bulletin contains instructions for when DTC U030000 appears and ?All Wheel Drive Malfunction Message? is displayed in the instrument cluster.

AUDI · 2017-08-21

This bulletin contains instructions for when DTC U030000 appears and ?All Wheel Drive Malfunction Message? is displayed in the instrument cluster.

JAGUAR · 2016-05-26

"ISSUE: ENGINE DOES NOT CRANK, DTC U0300 00 LOGGED EITHER IN THE BODY CONTROL MODULE (BCM), OR POWERTRAIN CONTROL MODULE (PCM) AND TRANSMISSION CONTROL MODULE (TCM), WITH GATEWAY MODULE (GWM) AND VARIOUS OTHER ELECTRONIC CONTROL UNITS (ECUS) SHOWING AS OFFLINE IN NETWORK INTEGRITY TEST ON SYMPTOM DRIVEN DIAGNOSTICS (SDD) MACHINE."

FORD, LINCOLN, MERCURY · 2004-03-01

DIAGNOSTIC TROUBLE CODE (DTC) U0300 (INTERNAL CONTROL MODULE SOFTWARE INCOMPATIBILITY) STORED IN THE PCM WITH NO OTHER DTC'S PRESENT. *TT

FORD, MERCURY · 2004-02-01

DELAYED CRANK WITH NO START, DIAGNOSTIC TROUBLE CODES (DTC) U0300/P0606/P2105/P2107, MALFUNCTION INDICATOR MODULE (MIL) AND WRENCH LIGHT ON. *MJ