CHRYSLER, DODGE, FIAT, JEEP, MOPAR, PLYMOUTH

9003615

2017-03-01 · NHTSA 10139986

掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。

メーカー概要

英語の原文

Electronic Shifter Module (ESM) If DTC's U1465, U1466, U1267 are present Stored or Active OR if U114C is Active, please replace the PRNDM and Shifter with the following NIK: 04670682AG Shifter Lower & one of the following PRNDM's which applies; 68253107AC LHD BASE PRNDM 68253112AC RHD BASE PRNDM 68286830AD LHD SRT PRNDM 68286828AD RHD SRT PRNDM Special Notes below from previous TechTip; NOTE 1: If mismatch between shifter NIK and PRNDM occur, it may appear that the PRNDM will not light up the first time the shifter is woken up via CAN. Please wait 2 minutes 15 seconds for the PRNDM lights to come back on. This is due to a software update feature of the Shifter lower (04670682A$). During PRNDM software update, the shifter will not be Functional. NOTE 2: If Shifter is awake on CAN while disconnecting PRNDM from Shifter (04670682A$), U114C-00 will activate. NOTE 3: PRNDM supply Voltage from Shifter will be deactivated after 3 seconds if PRNDM is disconnected from Shifter while Shifter is awake via CAN and U114C-00 will activate. Power to Shifter will have to be removed for approx.. 20 seconds after PRNDM is connected to reset power to PRNDM from the Shifter. Power can be reset by removing battery power or disconnecting the shifter main connector. This is due to a safety feature built into the Shifter that will cut power to the PRNDM if a communication error is observed between the Shifter and PRNDM. NOTE 4: If Shifter is not responsive after Dead Battery condition, Charge Battery, and once complete disconnect battery terminals for 30 seconds and reconnect. Check Shifter functionality. Please return parts back to FCA Engineering if PRNDM is deemed non-functional after performing this TechTip.

メーカー、番号、発行日、全文概要が一致した登録だけをまとめ、元番号を残します。古い資料も保持し、明示的に確認できた後続版を表示します。1994年以前の車両との関連は通常結果から分離します。年式未記載は全年式への適用を意味しません。