JEEP

18-023-25 REV. A

2025-12-17 · NHTSA 11026797

掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。

メーカー概要

英語の原文

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● **U0673-00 - Lost Communication With Ion Sense Module (in active or stored status). ● P00C6-00 - Fuel Rail Pressure Too Low - Engine Cranking (in active or stored status). ● P2C90-00 - Crankcase Ventilation System - Hose "A" Disconnected (in active or stored status). ● P0116-00 - Engine Coolant Temperature Sensor 1 Performance (in active or stored status). ● P0011-00 - Bank 1 Camshaft 1 Position Timing Over Advanced Or (in active or stored status). ● P25E4-00 - B Camshaft Position - Unable To Achieve Locked Position Bank 1 (in active or stored status). ● P06DD-00 - Engine Oil Pressure Control Circuit Performance/stuck Off (in active or stored status).** ● P1CEA - Boost Side EVAP Purge System Performance **(in active or stored status).** ● P2AF6 - Dual Starter Relay Stuck **(in active or stored status).** ● P026E - Charge Air Cooler Coolant Pump Performance **(in active or stored status).** Customers may also comment on one or more of the following: ● **Oil Level High Warning in the Instrument Panel Cluster (IPC). ● Engine will not start.** ● Low battery State of Charge (SoC) leading to battery replacement. ● Vehicle does not restart after an Engine Stop Start (ESS) event but will restart after an ignition cycle. This bulletin involves inspecting and possibly reprogramming the PCM with the latest available software.

メーカー、番号、発行日、全文概要が一致した登録だけをまとめ、元番号を残します。古い資料も保持し、明示的に確認できた後続版を表示します。1994年以前の車両との関連は通常結果から分離します。年式未記載は全年式への適用を意味しません。