MAZDA

09-027-26

2026-09-29 · NHTSA 11037628

掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。

メーカー概要

英語の原文

DESCRIPTION Some CX-70 and CX-90 PHEV vehicles may fail to start (enter READY mode) in cold weather, but the vehicle can often be started successfully on the next attempt. This may occur when leakage current between connector terminals causes the MAIN Relay to be falsely detected as ON. As a result, the Battery ECU may incorrectly determine the relay status, preventing READY mode activation and resulting in a no-start condition. One or more of the following DTCs may be stored: P0AB9, U0100, U0110, and U0115 and multiple warning lights may also turn on. This is caused by corrosion of the connector terminals on the 3002-411 connector in the luggage compartment from water. To eliminate this concern, urethane has been added around the connector to help prevent water from reaching the connector terminals. REPAIR PROCEDURE 1. Verify the customer concern. 2. Diagnose and repair the vehicle according to the following steps. NOTE: The following procedure uses a heat shrink tube with solder. (1) Connect wire to wire with heat shrink tube. (2) Form a loop at the end of wire to create a passage for the other wire.

メーカー、番号、発行日、全文概要が一致した登録だけをまとめ、元番号を残します。古い資料も保持し、明示的に確認できた後続版を表示します。1994年以前の車両との関連は通常結果から分離します。年式未記載は全年式への適用を意味しません。