掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。
C2702 ← このコードの意味は？6 検索結果
KIA · 2020-04-28
TECHNICAL SERVICE BULLETIN: SERVICE ACTION: BCW SOFTWARE UPDATE (SA422) - This bulletin provides the procedure to update the logic of the Blind Spot Collision Warning (BCW) on some 2021MY Seltos (SP2) vehicles, produced from November 20, 2019 through March 27, 2020, which may exhibit MIL ON with DTC(s) C2702 – C2703.
HYUNDAI · 2019-10-11
Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: ? C2702 ? Control Module Missing Calibration ? C2703 ? Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
HYUNDAI · 2019-10-11
Certain 2019 MY Elantra (ADa) vehicles may experience the Blind-Spot Collision Warning (BCW) light displayed on the instrument cluster. In some cases one and/or two of the following DTCs can be set: · C2702 Control Module Missing Calibration · C2703 Control Module Slave Missing Calibration This bulletin provides the service procedure to replace the left and right Blind-Spot radar modules.
KIA · 2018-12-20
TSB - BCW LOGIC IMPROVEMENT FOR DTC C270254 - This bulletin provides the procedure to improve the logic of the Blind Spot Collision Warning (BCW) system on some 2019MY Sorento (UMa) vehicles, produced from January 22, 2018 through September 22, 2018, which may experience a Malfunction Indicator Lamp (MIL) illumination with DTC C270254, even though there is no issue or defective part.
KIA · 2016-09-01
PITSTOP: RECALIBRATION OF BLIND SPOT DETECTION AFTER COLLISION REPAIRS - THIS PITSTOP PROVIDES INFORMATION RELATING TO SOME VEHICLES EQUIPPED WITH BLIND SPOT DETECTION (BSD), WHICH MAY EXHIBIT A “CHECK BSD SYSTEM” MESSAGE WITH DTCS: C270254 AND C270354: C270254: CONTROL MODULE MASTER MISSING CALIBRATION / C270354: CONTROL MODULE SLAVE MISSING CALIBRATION
KIA · 2015-04-02
TSB: SERVICE ACTION: BLIND SPOT DETECTION (BSD) SYSTEM LOGIC IMPROVEMENT (SA187) - THIS BULLETIN PROVIDES INFORMATION RELATED TO AN UPGRADE OF THE LOGIC FOR THE BLIND SPOT DETECTION (BSD) SYSTEM OF SOME 2015MY OPTIMA (QF) VEHICLES, PRODUCED FROM AUGUST 12, 2014 TO NOVEMBER 19, 2014. THE VEHICLES IN QUESTION MAY HAVE A “CHECK BSD SYSTEM” MESSAGE ILLUMINATED IN THE INSTRUMENT CLUSTER, ALONG WITH DTC C270254 OR C270354 STORED IN BSD SYSTEM, AS ACTIVE OR PENDING, DURING FAULT CODE SEARCHING. TO RESOLVE THIS CONCERN, THE BSD SYSTEM SHOULD BE REPROGRAMMED USING THE GDS DOWNLOAD, AS DESCRIBED IN THIS BULLETIN. FOR CONFIRMATION THAT THE LATEST REFLASH HAS BEEN DONE TO A VEHICLE YOU ARE WORKING ON, VERIFY ROM ID USING THE TABLES IN THIS TSB.