表示

パワートレイン

P0017

コードの意味とメーカー資料

OBD-II / DTC

参考の意味

このコードの意味は?

記載はメーカーと資料に対応します。完全なコード、検出装置、モデル年、エンジンを照合してください。

コードは検出された状態を示すもので、交換部品を自動的に特定するものではありません。

車両条件で絞り込む

掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。

部品を交換する前に

コードとフリーズフレームを保存し、バッテリー、関連コード、配線やホースの目視可能な損傷を確認します。車両の診断手順と試験結果に従って交換を判断します。

診断記録シート →

メーカー資料の表記

意味は車種や後続文字で変わることがあります。原文の記載であり共通診断ではありません。

すべて見る ↗

メーカー技術情報

90

英語の原文

すべて見る ↗

09-98-22R ↗

SUBARU

This bulletin announces the availability of new reprograming files for the Engine Control Module (ECM) developed to remedy the following DTCs: P0016, P0017, P0018, P0019, P0014, P0024, P0128, P2109. If any of the DTCs listed above are found to be stored in the ECM, follow the procedures outlined in the bulletin. This is an revis…

A23-049 ↗

HONDA

Service Bulletin - Affected vehicles may be equipped with an incorrectly machined engine block at the crankshaft position sensor (CKP) mounting location. Vehicles may experience a no start condition, low speed rough idle, engine RPM hunting, or have the following DTCs set: P0017 (Camshaft Position (CMP) Sensor B and Crankshaft P…

JEEP

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0133 - O2 Sensor 1/1 Slow response. ● P2453 - Particulate Filter Pressure Sensor “A” Circuit Range/Performance.…

JEEP

Flash: Powertrain Control Module (PCM) Updates Customers must experience a Malfunction Indicator Lamp (MIL) illumination and the vehicle must exhibit/set one or more of the following Diagnostic Trouble Codes (DTCs): ● P0133 - O2 Sensor 1/1 Slow response. ● P2453 - Particulate Filter Pressure Sensor “A” Circuit Range/Performance.…

対象車両を確認

823

掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。

すべて見る ↗

メーカー車種モデル年
AudiA4 ↗2025
AudiA4 ↗2024
AudiA4 ↗2023
AudiA4 ↗2022
AudiA4 ↗2021
AudiA4 ↗2009
AudiA4 ALLROAD ↗2025
AudiA4 ALLROAD ↗2024

コードの意味とメーカー資料

英語の原文 · 掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。

Crankshaft Position Camshaft Position Correlation (Bank 1 Sensor B)

運転を続けてもよい?

コードだけでは走行の安全性を判断できません。警告灯の点滅、激しい振動、過熱、油圧警告、制動や操舵の異常は速やかな対応が必要です。車両制御やエンジンの安全が損なわれる場合、安全な場所に停車して支援を求め、取扱説明書に従ってください。