掲載車両は調査の手がかりです。エンジン、製造期間、ソフトウェア条件はメーカー資料で確認してください。
P1A90 ← このコードの意味は？12 検索結果
KIA · 2026-01-16
TECHNICAL SERVICE BULLETIN: SUBSEQUENT REPAIR ACTION: ICCU AND FUSE REPLACEMENT (SC327Y) - This bulletin provides information related to the Technical Service Bulletin previously published under SC327, titled “ICCU and Fuse Inspection/Replacement and ICCU Software Upgrade.” If DTC P1A9096 is present or stored after ICCU Software Upgrade has been performed per SC327, follow the instructions in this bulletin to replace the ICCU and ICCU fuse.
KIA · 2024-12-05
This bulletin was closed and superseded by SC327Y TSB. "This bulletin provides information related to the Technical Service Bulletin previously published under SC302, titled “ICCU and Fuse Inspection/Replacement and ICCU Software Upgrade.” If DTC P1A9096 is present or stored after ICCU Software Upgrade has been performed per SC302."
KIA · 2024-12-05
This bulletin provides information related to the Technical Service Bulletin previously published under SC327, titled “ICCU and Fuse Inspection/Replacement and ICCU Software Upgrade.” If DTC P1A9096 is present or stored after ICCU Software Upgrade has been performed per SC327.
GENESIS · 2024-07-12
This bulletin provides important special service instructions to properly repair a vehicle that has been diagnosed to require an Integrated Charge Control Unit (ICCU) replacement, such as required for DTC P1A9096 DC to DC related charging concern or for inoperative AC charging. • The ICCU fuse accessible from a rear side panel of the EV Battery, should NEVER be replaced by itself prior to receiving an ICCU replacement part. • The ICCU fuse should be replaced at the same time as replacing the ICCU part. o The ICCU fuse function is to protect the EV Battery from a damaged ICCU. o DTC P1B77 Power Relay Assy (PRA) damage in the EV Battery can occur when an ICCU fuse is first replaced without also replacing the ICCU together. o Vehicles with P1B77 require Techline approval for field staff…
HYUNDAI · 2024-07-12
This bulletin provides important special service instructions to properly repair a vehicle that has been diagnosed to require an Integrated Charge Control Unit (ICCU) replacement, such as required for DTC P1A9096 DC to DC related charging concern or for inoperative AC charging. • The ICCU fuse accessible from a rear side panel of the EV Battery, should NEVER be replaced by itself prior to receiving an ICCU replacement part. • The ICCU fuse should be replaced at the same time as replacing the ICCU part. o The ICCU fuse function is to protect the EV Battery from a damaged ICCU. o DTC P1B77 Power Relay Assy (PRA) damage in the EV Battery can occur when an ICCU fuse is first replaced without also replacing the ICCU together. o Vehicles with P1B77 require Techline approval for field staff…
KIA · 2024-06-20
This bulletin provides information related to the Technical Service Bulletin previously published under SC302, titled “ICCU and Fuse Inspection/Replacement and ICCU Software Upgrade.” If DTC P1A9096 is present or stored after ICCU Software Upgrade has been performed per SC302.
GENESIS · 2023-09-21
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
GENESIS · 2023-09-21
Certain 2023MY G80 Electrified (RG3 EV), 2023-24MY GV60 (JW1 EV), and 2023-24MY GV70 Electrified (JK1a EV) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse…
GENESIS · 2023-08-15
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and fuse replacement.
GENESIS · 2023-08-15
Certain 2023MY G80 Electrified (RG3 EV) and 2023-24MY GV60 (JW1 EV), vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Integrated Charge Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and fuse replacement.
HYUNDAI · 2023-07-17
Certain 2022-2023MY IONIQ 5 (NE1) and 2023MY IONIQ 6 (CE1) vehicles may exhibit a condition where low 12V auxiliary battery charging occurs due to an ICCU (Intelligent Charging Control Unit) fault which may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear, instructing the driver to stop the vehicle. The vehicle will be inspected for a DTC P1A9096 and may require either an ICCU software update or ICCU replacement and potential fuse replacement (if fuse is blown when inspected).
HYUNDAI · 2023-07-17
Certain 22-23MY Ioniq 5 (NE1) & 23MY Ioniq 6 (CE1) vehicles may have a condition where low 12V auxiliary battery charging occurs due to an ICCU (Intelligent Charging Control Unit) fault and may set the following DTC P1A9096 – “DC/DC Converter Input Voltage Sensor Fault”. When a fault occurs, the vehicle may enter a reduced power mode while various warning lights, an audible chime will sound, and large messaging in the vehicle’s instrument cluster will appear and instruct the driver to stop the vehicle. The Service Procedure flow to be followed is outlined by the flowchart on Page-3. The ICCU system is to be checked by GDS for DTC P1A9096 and depending on the result, will involve either an ICCU software update, or ICCU and potential fuse replacement. Only replace the fuse after it is…